Crankcase Ventilation- Oil Separator Replacement, Diaphragm Check And Replacement - MTU 12 V 2000 M84 Operating Instructions Manual

7.4.2 Crankcase ventilation– Oil separator replacement, diaphragm check and
replacement
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Torque wrench, 6-50 Nm
Ratchet adapter
Filter element
Diaphragms
O-ring
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Replacing filter element of oil
separator
1. Remove cover (2) with O-ring (3).
2. Remove filter element (1) from housing (4).
3. Insert new filter element into housing (4)
ensuring correct position, and fit cover (2)
with new O-ring.
4. Tighten screws of cover (2) to specified tightening torque.
Name
Screw
5. Replace further oil separator elements in the same way.
72 | Task Description | MS150063/01E 2012-01
Size Type
Tightening torque
Part No.
F30027336
F30027340
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
Lubricant Value/Standard
6 Nm + 2 Nm
Qty.
1
1