Side Panel; Back Panel - Draytek Vigor2300 Quick Start User Manual

Side Panel

The printer port is located on the right side of the Vigor2300. Use a
printer cable to connect to your printer.

Back Panel

Power
DC5V
DC 5V
Power
LAN ports
1-4
WAN
Factory
Reset
1X 2X
For connection the Vigor2300 to an electrial outlet.
Use this switch to provide power to your Vigor2300.
The RJ-45 Ethernet ports labeled 1-4 are used to
connect your computers using Ethernet cables to
your Vigor2300.
The RJ-45 Ethernet ports labeled WAN is used to
connect your Vigor2300 to your DSL or cable
modem.
Resets the configuration to default settings. Refer
to the Appendix for instructions on how to perform
a factory reset.
Printer Port
3X 4X
7
Factory
WAN
Reset