Adjusting Suppy Air Direction; Air Flow Direction Control; Swing Function - Carrier 53KHET 30-36 Installation Manual

21. AIR CIRCULATION FOR INDOOR UNIT

21-1 AIR FLOW DIRECTION CONTROL

Air is supplied into the room through the supply air louvers located
on the bottom of the indoor unit.
Air from the room is drawn into the indoor unit through the front
panel and filters which are located behind the front panel.
Make absolutely sure that the supply and return air flow of the
indoor unit are not obstructed (even partially).
• Adjust supply air direction properly otherwise, it might
cause discomfort or cause uneven room temperatures.
• Adjust the horizontal louver using the remote control.
• Adjust the vertical louvers manually.
21-2 For model 30K
AIR DIRECTION Function
The air conditioner automatically adjusts the vertical supply air
direction in accordance with the operating mode.
To set the vertical supply air direction (Up- Down)
• Perform this function while the unit is in operation.
• Keep pressing the AIR DIRECTION button on the remote
control to move the louver to the desired.
• In subsequent operations, the vertical air flow is automatically
set in the direction to which you adjusted the louver
by pressing the AIR DIRECTION button.

SWING Function

To automatically swing the horizontal louvers for the vertical supply
air direction (Up- Down)
Perform this function while the air conditioner is in operation.
• Press SWING button on the remote control without releasing
for 2 more seconds, the horizontal louver would swing automatically.
To stop the function, press SWING button again.
Range
46