Remote Control Installation - Carrier 53KHET 30-36 Installation Manual

53khet 30-36 series cool only, 53qhet 30-36 & 53qhe36 series heat pump, hi wall split air conditioners 220-240v ~ 50hz 1ph
Table of Contents

Advertisement

REMOTE CONTROL INSTALLATION (Cont.)
14-2 INSTRUCTIONS OF USING WIRELESS REMOTE CONTROL
1- The remote control must be directed toward the receiver of indoor unit when pressing the buttons
of the desired functions. An acoustical acknowledgement sound (beep) will indicate that signal has
been received.
2- Avoid direct sunlight on the receiver of indoor unit, which may interfere with good signal reception
and the air conditioner may not work properly. Draw the curtains to avoid direct sunlight.
3- Avoid obstacles obstructions such as curtains, doors or other materials between the remote control
and the receiver of indoor unit to avoid blocking the signals from the remote control to the indoor unit.
4- The maximum operating distance for the remote control is approximately 8 meters.
5- Keep the remote control away from water. Do not let the remote control fall down.
6- Never use objects with sharp point to press the button on the remote control.
7- Prevent any liquid from falling into the remote control.
8- If other electric applications react to the remote control, move these applications.
14-3 MOUNTING PLASTIC HOLDER OF REMOTE CONTROL
• Fix the plastic holder of the remote control on the wall by using screws.
Screw
20
8 meter
Remote
control
Plastic holder

Advertisement

Table of Contents
loading

Table of Contents