Table of Contents
Advertisement
CONTROL - FRONT PANEL:
1. Channel 1/5 – Channel 4/8 - These buttons perform the following functions:
a) Displays a picture in Full Screen. If you are in the Quad1 mode, select the
Channel 1/5 button and hold for 2-3 seconds to view Camera 1 in Full Screen.
To view other camera locations, press Ch 2/6, Ch 3/7, Ch 4/8 buttons.
b) Freezes a specific camera.
You have the option to freeze images in Full or Quad screen mode.
In Quad Screen mode: press a channel button to freeze this channel in the
Quad screen; press again to unfreeze;
In Full Screen mode: press the current channel being viewed to freeze it; press
again to unfreeze.
c) Scrolls LEFT / UP / DOWN / RIGHT in Menu mode.
In Menu mode: These buttons are used to navigate through menu options. For
more information on Menu mode, please refer to page
d) Scrolls LEFT / UP / DOWN / RIGHT in Zoom mode.
For more information on Zoom mode, refer to page 6.
e) MOVE / ZOOM / FOCUS in Pan Tilt mode.
For more information on Pan Tilt, refer to page 10.
2. (Quad 1/2) / Enter - This button serves 2 functions:
(a) Quad 1/2- Pressing this button goes to Quad viewing mode (2 quad viewing
screens)
(b) Enter – Confirms selection in the Menu mode
3. FRZ ALL / ALRS - This button serves 2 functions:
a) FRZ ALL (Freeze All) – Pressing this button Freezes the screen being
viewed. Pressing this button in Quad mode will freeze all four cameras. An "F"
will appear in the On-Screen Display.
b) ALRS (Alarm) – During an Alarm, this button will turn off the alarm sound and
set the system to the previous setting.
4. Volume – These two buttons turn the Volume Up / Down.
1
2
3
4
5
6
7
8
9
10 11 12
8.
13
-5-
Advertisement
Table of Contents
