Monitor Connections; Trouble Shooting - Sylvania SY14Q5184CUQ-A Instruction Manual

MONITOR CONNECTIONS:

VIDEO
CAMERA

TROUBLE SHOOTING:

If the system does not function properly, please check the following points.
MONITOR
WIRED
CAMERA
1. Camera 1 Input
Connect one end of the supplied 65ft cable to the first
wired camera, the other end to camera Input 1
AUDIO
2. Camera 2 – 8 Inputs
DC12V
Connect optional additional cameras to the camera 2-8
inputs using either the DIN or BNC camera inputs
PROBLEM
Too dark or bright picture
NO POWER
Poor picture quality
Picture but no sound
Shrinking picture
No Picture
Picture Flickering or
Over Exposed
REMEDY
Readjust the CONTRAST or BRIGHTNESS controls
Check for AC connection NO POWER
Clean the camera lens. Readjust the CONTRAST or
BRIGHTNESS controls
Adjust the VOLUME
Check the condition of the POWER source
Check the cable for any lose connection
Make sure the camera is not facing any direct light
or sunlight
-15-