Sylvania SY14Q5184CUQ-A Instruction Manual page 10

Main - Pressing the Main button while viewing PIP/Dual PIP/POP mode will change the
camera location of the main screen being displayed.
Sub1 & Sub2 - Pressing the Sub1/Sub2 buttons in PIP mode changes one of the two
camera locations being displayed as a picture in picture. These buttons will also remove /
add a sub-picture to create a Single PIP / Dual PIP viewing mode.
PIP Sequence – Holding this button for 3 seconds initiates Sequencing in Single or Dual
PIP mode. To exit PIP Sequencing, press the PIP/POP button twice.
Note: You can program whether the Main picture or the Sub picture switches during PIP
Sequencing via the Menu. Please refer to page 8 for more details
10. Audio Select – In Quad mode, the user can select the channel with audio. Pressing this
button automatically changes the audio from camera to camera.
11. Mute - This button mutes audio. Press the button again to turn the audio feature back on.
12. Talk - Press and hold this button to talk to a specific camera location. This button must be
pressed the entire time, while talking. To listen to the camera location release the Talk
button.
14.Standby Switch - This switch will turn the monitor ON/OFF. A red LED indicator light is ON
when the monitor is in Standby mode. Press the button to turn the power ON. Allow
for 5-7 seconds for the picture to appear.
Note: To provide longer life to the CRT monitor, turn the Standby switch OFF when
not in use. The system will continue to record images to VCR.
-7-