Monitor Controls - Back Panel - Sylvania SY14Q5184CUQ-A Instruction Manual

MONITOR CONTROLS - BACK PANEL:

1
10 9 8
1. Power Switch – This button controls power to the entire unit. Depress the side with the "•"
to turn power ON. Depress the other side to turn the unit OFF
2. RCA Audio inputs - Channel 1-8 Audio inputs.(for cameras with standard RCA Audio output)
3. Alarm Function Terminals - These terminals are used to connect external alarm devices
such as a motion sensor, door/alarm sensor, or time lapse VCR
4. USB Port – Connects to a PC using a USB cable
5. Slave A/V Out – Audio/Video Output signal for transmitting to a slave Monitor or VCR
6. VCR Audio/Video Out - Use the A/V cables (not supplied) to transmit audio and video from
7. VCR Audio /Video In - Use with A/V cables (not supplied) to receive audio and video from an
external source (VCR )
8. 6 Pin DIN Camera Inputs - Channel 1-8 Camera inputs (for cameras with 6 pin DIN inputs)
9. BNC Camera Inputs - Channel 1-8 camera inputs (for cameras with standard Video outputs)
10. AC Input - Connects the attached power cord from the monitor to an electrical outlet
2
the monitor to a VCR
3 4
7 6 5
-12-