Monitor Connections & Trouble Shooting - Sylvania SY14Q2144 Series Instruction Manual

MONITOR CONNECTIONS
TROUBLE SHOOTING
If the system does not function properly, please check the following points.
MONITOR
Too dark or bright picture
NO POWER
Poor picture quality
Picture but no sound
Shrinking picture
No Picture
CAMERA
Picture Flickering or
Over Exposed
1 3 4
2
PROBLEM
1. Camera 1 Input
Connect one end of the supplied 65ft cable to
the first wired camera, the other end to camera
Input 1.
2. Camera 2 – 4 Inputs
Connect optional/additional cameras to the
camera 2-4 inputs using either the DIN or
BNC camera inputs.
REMEDY
Readjust the CONTRAST or BRIGHTNESS controls
Check for AC connection
Clean the camera lens. Readjust the CONTRAST or
BRIGHTNESS controls
Adjust the VOLUME
Check the condition of the POWER source
Check the cable for any lose connection
Make sure the camera is not facing any direct light
or sunlight
-13-