Table of Contents
Advertisement
MONITOR CONTROLS - BACK PANEL
1
8
1. Power - This button controls power to the entire unit . Depress the side with the '•', to turn power
ON. Depress the other side to turn the unit OFF. When this switch is turned On, the screen
display will always be in Quad mode.
2. VCR Audio /Video In - Use with A/V cables (not supplied) to receive audio and video from an
external source (VCR).
3. VCR Audio/Video Out - Use with A/V cables (not supplied) to transmit audio and video monitor
to VCR.
4. Slave Audio/Video Out - Use with A/V cables (not supplied) for use with a slave monitor.
5. 6 Pin Din Camera Inputs - Channel 1-4 Camera inputs (for cameras with 6 pin din camera
inputs).
6. BNC Camera Inputs - Channel 1-4 camera inputs (for cameras with BNC Video outputs).
7. RCA Audio inputs - Channel 1-4 Audio inputs (for cameras with RCA Audio output).
8. Alarm Function Terminals - These terminals are used to connect external alarm devices such
as a motion sensor, door/alarm sensor, or time lapse VCR. Refer to Alarm Connection in the
appendices for further details.
***IMPORTANT NOTE: YOU HAVE TWO CHOICES OF RECORDING WHEN USING
A TIME LAPSE VCR: DUPLEX OR ACTUAL***
Duplex recording – Records quad screen to VCR. To select this option ensure you connect
the system to the VCR OUT on the back of the monitor to the Audio/Video IN of the VCR.
Actual recording – Records what appears on the monitor. To select this option, on the menu
feature on the monitor, choose (VCR OUT – Actual).
4
3
2
5
7
6
-10-
Advertisement
Table of Contents
