General Information - Shibaura CM314 Operator's Manual

SECTION 1

GENERAL INFORMATION

PLEASE READ CAREFULLY:
For a complete list of the pre-delivery service
checks performed by your dealer, refer to the
PRE-DELIVERY SERVICE checklist found at the
back of this manual. Keep one copy as your
record of the service performed. The other copy
should be removed from the manual and kept
by your dealer. MAKE SURE THAT BOTH
COPIES ARE COMPLETED AND THAT YOU
AND THE DEALER SIGN BOTH COPIES.
A PRODUCT IDENTIFICATION PLATE is located
in the front transmission case under the front
body of the mower.
The numbers on the plate are important in the
event your mower should require future service.
For your convenience, have your dealer record
these numbers in the appropriate spaces below.
IHI Shibaura Machinery Corporation is
continually striving to improve its products. We
reserve the right to change prices, specification,
or equipment at any time without notice.
All data given in this book is subject to
production variations. Dimensions and weights
are approximate only, and the illustrations do
not necessarily depict Mower in standard
condition. For exact information about any
particular Mower, please consult your
SHIBAURA dealer.
This Mower has been designed for doing light
work, such as mowing, blowing snow. Don not
attempt to use implements that were not
designed for this mower, as they may cause
damage to the mower.
1-1