General Information And Safty - Shibaura ST460 Operator's Manual

GENERAL INFORMATION AND SAFTY

PLEASE READ CAREFULLY:
For a complete list of the pre-delivery service
checks performed by your dealer, refer to the
PRE-DELIVERY SERVICE check list found at
the back of this manual. Keep one copy as your
record of the service performed. The other
should be removed from the manual and kept by
your dealer. MAKE SURE THAT BOTH COPIES
ARE COMPLETED AND THAT YOU AND THE
DEALER SIGN BOTH COPIES.
After you have operated your tractor for fifty
hours, take this manual and your tractor to your
dealer. He will then perform the factory
recommended 50-HOUR SERVICE as listed on
the lower portions at the back of this manual —
without charge — except for lubricant, oil, or
filters replaced as part of normal maintenance.
MAKE SURE THAT YOU AND THE DEALER
SIGN BOTH COPIES.
A PRODUCT IDENTIFICATION
located on the right-hand side of the front frame.
The numbers on the plate are important should
your tractor require future service. For your
convenience, have your dealer record the
numbers in the appropriate spaces below.
SHIBAURA policy
improvement, and the right to change prices,
specification or equipment at any time without
notice is reserved.
All data given in this manual is subject to
production variations. Dimensions and weights
are approximate only and the illustrations do not
necessarily show tractors in standard condition.
For exact information about any particular tractor
please consult your SHIBAURA Tractor Dealer.
SECTION 1
GENERAL INFORMATION
PLATE
is one of continuous
is
1-1