Wheel Bolt Torque; Front Wheel Torque; Rear Wheel Torque; Pto Control Lever Adjustment - Shibaura CM314 Operator's Manual

WHEEL BOLT TORQUE

Tighten the wheel bolts to the specified torque
anytime the wheel assembly is removed from
the mower or the wheel bolts are loosened.

Front Wheel Torque

132±16 N·m
NOTE: Torque for the front wheels is the
same for 2WD and FWD axles.

Rear Wheel Torque

50±5.9 N·m
Check wheel bolt torque daily until torque
stabilized.

PTO CONTROL LEVER ADJUSTMENT

Note: Adjust the PTO control lever linkage
every 100 hours.
1. The PTO control lever must move easily (soft),
through the first 20% of travel. The remaining
80% of control lever travel must have a
resistance (hard).
LUBRICATION AND MAINTENANCE
3-25