Toyota 2006 Prius Owner's Manual page 308

WWW.MANUALS.WS
R
(a) Programing the HomeLink
R
The HomeLink in your vehicle has 3
buttons and you can store one program
for each button.
To ensure correct programing into the
R
HomeLink , install a new battery in the
hand- held transmitter prior to program-
ming.
The battery side of the hand- held trans-
mitter must be pointed away from the
R
HomeLink during the programming pro-
cess.
For Canadian users, follow the procedure
in "Programming an entrance gate/Pro-
gramming all devices in the Canadian
market".
R
1. Decide which of 3 HomeLink
you want to program.
308
WWW.MANUALS.WS
28p130a
R
HomeLink
Hand-held
garage transmitter
2. Place your hand- held garage transmit-
ter 25 to 75 mm (1 to 3 in.) away from
the surface of the HomeLink
Keep the red indicator
buttons
R
HomeLink in view while programming.
28p131
25 to 75 mm
(1 to 3 in.)
3. Simultaneously
hand- held garage
R
. along with the selected HomeLink
ton.
light on the
Do not release the buttons until step 4
has been completed.
4. When the indicator
R
HomeLink changes from a slow to a
rapid flash after 20 seconds, you can
release both buttons.
press and hold the
transmitter button
R
but-
light on the