Auto Mode - Honeywell HCCM674M User Manual

Auto Mode

• Press SET to adjust the Day/Night function settings.
DAY/NIGHT
BURST ON
DELAY CNT
DAY->NIGHT
NIGHT->DAY
RETURN 
BURST Selects whether to output the burst signal
when the BW status has been identified.
DELAY Sets the delay prior to the Day-to-Night or
CNT Night-to-Day transition.
DAY-> Sets the Day-to-Night switching
NIGHT threshold.
NIGHT-> Sets the Night-to-Day switching
DAY threshold.
800-11199 - E - 09/2012
010
003
005
B/W Mode
• Press SET to adjust the Night mode settings.
BW
BURST ON
IR OPTIMIZER ON
MODE AUTO
LEVEL
RETURN 
BURST Selects whether to output the burst
signal when the BW status has been
identified.
IR OPTIMIZER Not supported
MODE Not supported
LEVEL Not supported
015
25