Day/Night - Honeywell HCCM674M User Manual

AREA SEL Selects the mask frame to be adjusted.
TOP Sets the top side of the mask frame.
BOTTOM Sets the bottom side of the mask frame.
LEFT Sets the left side of the mask frame.
RIGHT Sets the right side of the mask frame.
COLOR Sets the color of the mask frame.
TRANSP Sets the transparency ratio of the mask
frames.
MOSAIC Sets the mask frame mosaic function.

Day/Night

When Day/Night is enabled, the camera provides color
video in well-lit conditions and automatically switches to
black-and-white video in low-light conditions.
1. Press SET to display the Setup menu.
2. Move the cursor to DAY/NIGHT, and then press
the left or right setup button to set Day/Night to
COLOR, B/W, or AUTO.
24
SETUP MENU
PRIVACY OFF
DAY/NIGHT AUTO

NR
CAMERA ID OFF
SYNC INT
LANGUAGE ENGLISH
CAMERA RESET
BACK 
EXIT 
SAVE ALL
COLOR Day/Night function is set to OFF.
B/W Forces the camera into Night mode and
chroma is set to OFF.
AUTO The camera automatically switches to
Day or Night mode, depending on the
illumination conditions.

www.honeywellvideo.com