Connections - Honeywell HCCM674M User Manual

Connections

Connect the video output of the camera to the video
input of a monitor or other equipment. When using a
"loop through" connection of two or more monitors, set
the 75 ohm switch of only the final monitor to On.
Select the type of cable according to the distance
between the camera and the connected equipment.
Video iris or
DC iris lens
To lens connector
To video input connector
14
Note
LL INT
SET
LENS
To power input terminal
~ ~
VIDEO GND
Do not turn on the power of any connected
equipment until all connections are
completed.
Power source
(24 V AC or 12 V DC)
www.honeywellvideo.com