Audio Setup; Speaker Setting; Switching Display - Kenwood KDC-3028 Instruction Manual

General features

Audio Setup

Setting the Sound system, such as Cross over
Network.
1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3
Select the Audio Setup item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that can
be adjusted switch as shown below.
4
Setup the Audio item
Turn the [VOL] knob.
Adjustment Item Display
Front High Pass "HPF"
2 3
Filter * *
Rear High Pass "HPR"
2 3
Filter * *
1 2 3
Low Pass Filter* * * "LPF"
Subwoofer Phase* 1 * 2 * 3 "PHAS"
Volume offset "V-OFF"
Loudness "LOUD"
• Volume offset: Each source's volume can be set as a
difference from the basic volume.
• Loudness: Compensating for low and high tones
during low volume.
1
• * You can control this item when <Switching preout>
(page 22) is set to "SWPRE SW". (KDC-MP428 only)
• * 2 You can control this item when <Subwoofer
Output> (page 11) is set to "SW ON".
• * 3 Function of the KDC-MP4028/KDC-MP428
5
Exit Audio Setup mode
Press [VOL] knob for at least 1 second.
10
|
English
Range
Through/80/100/120/150
/180 Hz
Through/80/100/120/150
/180 Hz
60/80/120/Through Hz
Reverse (180°) / Normal (0°)
–8 — ±0
ON/OFF

Speaker Setting

Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [VOL] knob.
3
Select the Speaker type
Turn the [VOL] knob.
Each time the knob is turned, the setting
switches as shown below.
Speaker type Display
OFF "SP OFF"
For 5 & 4 in. speaker "SP 5/4"
For 6 & 6x9 in. speaker "SP 6*9/6"
For the OEM speaker "SP OEM"
4
Exit Speaker Setting mode
Press the [VOL] knob.

Switching Display

Switching the information displayed.
1
Enter Switching Display mode
Press the Control knob for at least 1 second.
"DISP SEL" is displayed.
2
Select the Display item
Push the Control knob to [4] or [¢].
In Tuner source
Information
Frequency
Clock
In CD & External disc source
Information
Disc title* (In External disc source or KDC-
MP4028/KDC-MP428 internal CD source)
Track title* (In External disc source or KDC-
MP4028/KDC-MP428 internal CD source)
Track number & Play time
Clock
Display
"FREQ"
"CLOCK"
Display
"D-TITLE"
"T-TITLE"
"P-TIME"
"CLOCK"