System Q; Audio Control - Kenwood KDC-3028 Instruction Manual

System Q

You can recall the best sound setting preset for
different types of music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
When the button is pressed once, the current
sound setting is displayed.
Each time the button is pressed, the sound
setting switches.
Sound setting
Natural
User memory
*
Rock
Pops
Easy
Top 40
Jazz
• * User memory: The values set on the <Audio
Control> (page 9).
KDC-3028/KDC-328 doesn't have the User memory
function so the values of Bass, Middle, and Treble set
in audio control are replaced to the System Q values
and "USER" is not be displayed when the System Q
setting is changed.
• Each setting value is changed with the <Speaker
Setting> (page 10).
First, select the speaker type with the Speaker setting.

Audio Control

1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the Audio item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that can
be adjusted switch as shown below.
4
Adjust the Audio item
Turn the [VOL] knob.
Adjustment Item
Subwoofer level*
Bass level
Middle level
Treble level
Balance
Fader
• *
• *
Display
• *
"NATURAL"
"USER"
5
Exit Audio Control mode
"ROCK"
Press any button.
"POPS"
Press the button which is not [VOL] knob and
"EASY"
[ATT] button.
"TOP40"
"JAZZ"
Display
1 2 3
* * "SW L"
"BAS L"
"MID L"
"TRE L"
"BAL"
"FAD"
1
You can control this item when <Switching preout>
(page 22) is set to "SWPRE SW". (KDC-MP428 only)
2
You can control this item when <Subwoofer
Output> (page 11) is set to "SW ON".
3 Function of the KDC-MP4028/KDC-MP428
Range
–15 — +15
–8 — +8
–8 — +8
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15
9
|
English