Gericom Notebook Computer User Manual page 9

The minimum specifications for the flexible cord are
No. 18 AWG, (2) Type SJ, and (3) 2-conductor.
B.
For Japan:
All components of the cord set must bear a "PSE" or
" T " mark and registration number in accordance
with the Japanese Dentori Law.
The minimum specifications for the flexible cord
are .75m ㎡ conductors, (2) Type VCT or VCTF, and
(3) 2-conductor.
The cord set must have minimum rated current
capacity of 7 A.
The attachment plug must be a two-pole, grounded
type with a Japanese Industrial Standard C8303 (15
A, 125 VAC) configuration.
C. For Other Countries:
The cord set fittings must bear the certification mark
of the agency responsible for evaluation in a specific
country.
The flexible cord must be of a HAR (harmonized)
type H03VV-F.
The cord set must have a current capacity of a least
2.5 Amperes and voltage rating of 125 or 250 Vac.
CAUTION: MODEL U40SIx/ U50SIx (x=0~9) IS DESIGNED
TO USE WITH THE FLLOWING AC ADAPTER MODEL
ONLY
Manufacture: LISHIN INTERNATIONAL ENTERPRISE CORP.
Model: 0335C2065 (65W)
Manufacture: Delta Electronics, Inc.
Model: ADP-65HB AD (65W)
Manufacture: Hipro Electronics Co., Ltd
Model: HP-OK065E03 (65W)
18. When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of
fire, electric shock and injury to persons. These precautions
includes the following:
Do not use this product near water, for example, near a
bathtub, washbowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
3