1. Manuals
  2. Brands
  3. Gericom Manuals
  4. Laptop
  5. M510C
  6. User manual

Gericom M510C User Manual

Ego-series
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
M510C Notebook PC
M510C Notebook PC
M510C Notebook PC
M510C Notebook PC
M510C Notebook PC
User's Guide
User's Guide
User's Guide
User's Guide
User's Guide
G52-B1003X2
I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M510C and is the answer not in the manual?

Questions and answers

Related Manuals for Gericom M510C

Summary of Contents for Gericom M510C

  • Page 1 M510C Notebook PC M510C Notebook PC M510C Notebook PC M510C Notebook PC M510C Notebook PC User’s Guide User’s Guide User’s Guide User’s Guide User’s Guide G52-B1003X2...

  • Page 2: Regulations Information

    Regulations Information FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 3: Safety Guideline For Using Lithium Battery

    Safety Guideline for Using Lithium Battery (Danish) ADVARSEL! Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. (Deutsch) VORSICHT: Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleich-wertigen Typ.

  • Page 4: Caution On Using Modem

    Caution on Using Modem Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines.

  • Page 5: Safety Instructions

    Safety Instructions Read the safety instructions carefully and thoroughly. Save this User’s Guide for possible use later. Keep this equipment away from humidity and high temperature. Lay this equipment on a stable surface before setting it up. The openings on the enclosure are used for air convection and to prevent the equipment from overheating.

  • Page 6: Release History

    Notice Please note that the setting diagrams or values in this guide are FOR YOUR REFER- ENCE ONLY. The model you bought may be slightly different from the illustrations and descriptions in this guide. If you are not sure about these information, such as the computer’s specification and equipment, please ask your local vendor for help.

  • Page 7: Table Of Contents

    Table of Contents Getting Started 1.1 Before You Begin ..............1-2 Unpacking ................1-2 Features and Benefits ............1-3 1.2 Quick Components Guide ..........1-4 Top-open View ...............1-4 Right-side View ..............1-6 Left-side View ...............1-7 Rear View ................1-8 Bottom View ................1-10 1.3 Preparing to Operate ............1-12 Connecting the Power ............1-12 Turning On/Off the Notebook PC .........1-14 Basics of Using Notebook PC...
  • Page 8 2.4 Knowing the Touchpad ............2-11 Using the Touchpad ............... 2-12 Configuring the Touchpad ............2-14 2.5 The Hard Disk Drive ............2-15 2.6 Using the Optical Storage Device ........2-16 Inserting the CD ..............2-17 Removing the CD ..............2-18 Releasing the CD Manually ...........2-19 2.7 Using the Video Function ...........2-20 Powerful Video Controller .............2-20 Display Modes ...............2-21...
  • Page 9 The Battery Pack ..............4-3 4.2 Managing the Power ............4-7 Power Options ...............4-7 Intel® SpeedStep Technology ..........4-11 BIOS Setup 5.1 Using BIOS Setup Utility............5-2 When to Use BIOS Setup? ...........5-2 How to Run BIOS Setup? .............5-2 Control Keys ................5-3 5.2 Main Menu ................5-4 5.3 Advanced Menu ..............5-6 5.4 Security Menu ..............5-8 5.5 Peripheral Menu ..............5-11...
  • Page 10 Caring Your Notebook PC 7.1 Protecting Your Notebook PC ...........7-2 Locking Your Computer ............7-2 Setting Up Password .............7-3 Using the Anti-Virus Protection ..........7-4 7.2 Tips for Traveling ..............7-5 7.3 Taking Care of Your Computer ..........7-6 Placing and Operating Your Computer ........7-6 Cleaning Your Computer ............7-7 Using the Battery Pack ............7-7...

  • Page 11: Getting Started

    Getting Started Congratulations on purchasing your M510C Notebook PC! This chapter first provides a general introduction on your Notebook PC, to let you know the hardware components well and start to work easily. Why wait? Read on to learn more about the powerful features and multimedia function of your Notebook PC.

  • Page 12: Before You Begin

    M510C Series Notebook PC 1.1 Before You Begin Unpacking First, unpack the shipping carton and check all items carefully. If any item contained is damaged or missing, please contact your local dealer immediately. Also, keep the box and packing materials in case you need to ship the unit in the future.

  • Page 13: Features And Benefits

    Features and Benefits Next Generation CPU Support. Your Notebook PC is equipped with one of the latest CPU (central processing unit) that supports Intel® Centrino™ technology for excellent system performance and ultimate mobile function. Integrated Wireless LAN Solution. The computer is pre-installed with the Intel PRO/Wireless networking solution that allows you to roam between different rooms in the office or at home, without being disconnected the LAN cable.

  • Page 14: Quick Components Guide

    M510C Series Notebook PC 1.2 Quick Components Guide This section provides the multi-views of your Notebook PC, and briefly introduces the function of each component. Top-open View Press the Cover Button to open the top cover (see page 1-6), and you can find the main operating area of your computer.
  • Page 15 Display Panel The 15-inch XGA/SXGA+/14.1-inch XGA TFT color LCD screen displays the output of the computer. Quick Launch Buttons and Power Button - Power Button: to turn the computer power ON and OFF. - Quick Launch Buttons: one-touch buttons, allowing you to launch specific software application easily (see Quick Launch Buttons in Chapter 2 for more information).

  • Page 16: Right-Side View

    M510C Series Notebook PC Right-side View Knowing the components on the right side of your computer. Cover Button Press this button to open the top cover. System LEDs - Wireless LAN: glows Green to indicate the wireless LAN function of the computer is enabled.

  • Page 17: Left-Side View

    Left-side View Knowing the components on the left side of your computer. 4-in-1 Card Reader The built-in card reader supports MMC (multi-media card), SD (secure digital), SM (smart media), and MS (memory stick) cards. PC Card Slot The computer provides a PC card slot to support one Type-II PC card for expansion functions, such as LAN/WLAN card, modem card, memory card, etc.

  • Page 18: Rear View

    M510C Series Notebook PC Rear View Your Notebook PC provides many I/O ports on the rear panel. Kensington Lock This port is used to lock the computer to a location for security (see Caring Your Notebook PC in Chapter 7 for more information).
  • Page 19 Parallel Port The 25-pin D-sub parallel port allows you to connect a parallel device, such as the printer and scanner. USB Ports The USB 2.0 ports allow you to connect USB-interface peripheral devices, such as the mouse, keyboard, modem, external hard disk module, printer, and more. IEEE 1394 Port The IEEE 1394 port is a high-speed bus that allows you to connect high-end digital devices such as the DV (digital video camera).

  • Page 20: Bottom View

    M510C Series Notebook PC Bottom View Carefully put the computer upside down, and you can find the core components of the computer. 1 - 10...
  • Page 21 Battery Unlock Button If you want to replace a battery, press and slide the button to remove the battery pack. Battery Pack To supply power to your computer when the AC adapter is not connected (see Introduction to the Power Source in Chapter 4 for more information). Memory Compartment The computer provides two SO-DIMM slots for expanding the memory size up to 2GB.

  • Page 22: Preparing To Operate

    M510C Series Notebook PC 1.3 Preparing to Operate Connecting the Power Your Notebook PC is equipped with a high-capacity 8-cell Li-ion battery pack, and it can operate either on the battery’s power or AC power. However, for the first time to use your Notebook PC, it is recommended to connect the AC adapter and use the AC power.
  • Page 23 Disconnecting the AC Power When you disconnect the AC adapter, you should unplug the power cord from the electrical outlet first, and then unplug the connector from the computer. Disconnecting the AC power The AC adapter included in the package is correct for your Notebook PC;...

  • Page 24: Turning On/Off The Notebook Pc

    M510C Series Notebook PC Turning On/Off the Notebook PC Now, when the AC adapter is connected, you are ready to use your computer. Opening the Top Cover First, open the top cover by pressing the cover button on the right side of the computer ( ), and then lifting the top cover gently ( ).
  • Page 25 Turning On the Computer Make sure that the computer is connected to the AC power. Press the power button Once pressed, the power button Pressing the power button will light Blue to indicate that the computer is turned on; meanwhile, the Power LED on the right side of computer lights Green.
  • Page 26 M510C Series Notebook PC Turning Off the Computer In Windows operating system, always use the “Shut Down” command of the system to turn off the computer. This is the normal operating procedure that can prevent the system problems. Click Start ( ) from the taskbar, and then select the Turn Off Computer option ( ).
  • Page 27 If you are working on a program, such as Microsoft Word, you should save the data and close the program first, and then turn off the computer. Otherwise, you may lose your data. Confirm that the Hard Disk In-use LED is OFF before turning off the computer.
  • Page 28 MS-XXXX Notebook 1 - 18...

  • Page 29: Basics Of Using Notebook Pc

    Basics of Using Notebook PC This chapter introduces the operating basics for your Notebook PC, including the use of keyboard, touchpad, LCD panel, hard disk drive, and optical storage device. It also includes the advanced features such as audio and communication functions.

  • Page 30: Safety And Comfort Tips

    M510C Series Notebook PC 2.1 Safety and Comfort Tips If you are a beginner to the Notebook PC, please read the following tips to make yourself safe and comfortable during the operation. Set Up Your Work Environment The Notebook PC is a portable platform that allows you to work anywhere.

  • Page 31: Have A Good Work Habit

    Keep your hands and feet with optimal comfort. Sit straight and keep a good posture. Adjust the angle and position of LCD panel. Adjust the desk’s height. Adjust the chair’s height. Setting up your work environment Have a Good Work Habit Have a good work habit is important if you have to work with your Notebook PC for long periods of time;...

  • Page 32: Knowing The Keyboard

    M510C Series Notebook PC 2.2 Knowing the Keyboard The Notebook PC’s keyboard provides all the functions of a full-sized 87/88- key keyboard, and an additional [Fn] key for specific functions on the computer. The use of the keyboard can be divided into four categories: Typewriter keys, Cursor keys, Numeric keys, and Function keys.

  • Page 33: Typewriter Keys

    Typewriter Keys The Typewriter Keys The function of these Typewriter keys is the major function of the keyboard, which is similar to the keys on a typewriter. It also provides several keys for special purposes, such as the [Ctrl], [Alt], and [Esc] keys. When the lock keys are pressed, the corresponding LEDs will light up to indicate their status: Num Lock: Press and hold the [Fn] key, and then press this key to toggle...

  • Page 34: Cursor Keys

    M510C Series Notebook PC Cursor Keys The keyboard provides four cursor (arrow) keys and [Home], [PgUp], [PgDn], [End] keys at the lower right corner, which are used to control the cursor movement. The Cursor Keys Move the cursor left for one space.

  • Page 35: Numeric Keys

    This key is used to switch the typing mode between “insert” and “overtype“ modes. Press this key to delete one character to the right of the cursor, and move the following text left for one space. Press this key to delete one character to the left of the cursor, and move the following text left for one space.

  • Page 36: Function Keys

    M510C Series Notebook PC Function Keys Windows Keys You can find the Windows Logo key ( ) and one Application Logo key ( on the keyboard, which are used to perform Windows-specific functions, such as opening the Start menu and launching the shortcut menu. For more information of the two keys, please refer to your Windows manual or online help.

  • Page 37: Quick Launch Buttons

    2.3 Quick Launch Buttons With these four Quick Launch Buttons, you can easily access the Internet, read your E-mail, or launch your frequently used software application. Email: to launch the E-mail application (such as Outlook Express) to receive and send your E-mail. Internet: to launch the web browser (such as Internet Explorer) to surf the Internet.
  • Page 38 M510C Series Notebook PC Enter a name for the defined button and click OK . Input a name The desired program’s icon appears in the Search Key window, indicating that the program is defined to the button. Click Close .

  • Page 39: Knowing The Touchpad

    2.4 Knowing the Touchpad The touchpad integrated in your computer is a pointing device that compatible with the standard mouse, allowing you to control the computer by pointing the location of the cursor on the screen and making selection with its two buttons. The Touchpad Cursor Movement Area The pressure-sensitive area of the touchpad, allows you to place your finger...

  • Page 40: Using The Touchpad

    M510C Series Notebook PC Using the Touchpad The following table and diagrams provide some tips that you should know when using the touchpad: Positioning and Moving: Place your finger on the touchpad (usually using the forefinger), and the rectangular pad will act as a miniature duplicate of your display.
  • Page 41 Move the cursor by sliding your fingertip. Put your wrist on the desk comfortably. Using the Touchpad Do not place heavy/sharp objects on the touchpad; do not scratch the surface of touchpad. Clean the touchpad with soft dry cloth regularly to prevent the dust and liquids on it.

  • Page 42: Configuring The Touchpad

    M510C Series Notebook PC Configuring the Touchpad You can customize the pointing device to meet your personal needs. For example, if your are a left-hand user, you may want to swap the functions of the two buttons. In addition, you can change the size, shape, moving speed, and other advanced features of the cursor on the screen.

  • Page 43: The Hard Disk Drive

    2.5 The Hard Disk Drive Your computer is equipped with a 2.5-inch IDE (Integrated Drive Electronics) hard disk drive. The hard disk drive is a storage device with much higher speed and larger capacity than other storage devices, such as the floppy disk drive and optical storage devices.

  • Page 44: Using The Optical Storage Device

    M510C Series Notebook PC 2.6 Using the Optical Storage Device Your computer is equipped with an optical storage device, which is know as the CD/DVD-ROM, CD-RW, DVD Combo and DVD Dual drive. The actual device installed in your computer depends on the model you purchased.

  • Page 45: Inserting The Cd

    Inserting the CD The following instruction describes the general procedure when operating the optical storage device, including the DVD-ROM drive. Confirm that the computer is turned on. Press the Eject Button on the drive’s panel ( ), and the CD tray will slide out partially.

  • Page 46: Removing The Cd

    M510C Series Notebook PC Removing the CD Confirm that the computer is turned on. Press the Eject Button on the drive’s panel, and the CD tray will slide out partially. Then, gently pull the tray out until fully extended. Hold the CD by its edge with your fingers, and then lift it up from the tray.

  • Page 47: Releasing The Cd Manually

    Releasing the CD Manually If unfortunately you can not release the CD tray by pressing the Eject Button, you can release it manually: Confirm that the computer is turned off. Insert a pointed object (e.g. a straightened clip) into the Emergency Eject Hole ( ), and the CD tray will slide out partially.

  • Page 48: Using The Video Function

    M510C Series Notebook PC 2.7 Using the Video Function Your Notebook PC provides an outstanding video subsystem, including: ATI Mobility Radeon 9600 video controller with 64MB SDRAM, and 15-inch XGA/SXGA+/14.1-inch XGA TFT color LCD screen. Powerful Video Controller The power features of the ATI Mobility video controller include: 64-bit memory bus, with 64MB DDR SDRAM installed.

  • Page 49: Display Modes

    Display Modes The following table describes the resolution/color support of your Notebook Mode CRT monitor only Simulscan 640 * 480 8, 16, 32-bit color 8, 16, 32-bit color 8, 16, 32-bit color 800 * 600 8, 16, 32-bit color 8, 16, 32-bit color 8, 16, 32-bit color 1024 * 768 8, 16, 32-bit color...

  • Page 50: Configuring The Display Settings

    M510C Series Notebook PC Configuring the Display Settings Your Notebook PC has been set to a default resolution and colors when shipping: Now, you can change the settings to meet your needs through the operating system. Changing the Resolution and Colors Quality Click Start from the taskbar, and select Control Panel to open the Control Panel window.
  • Page 51 Changing the Display Output Device Click Start from the taskbar, and select Control Panel to open the Control Panel window. Double-click the Display item to open the Display Properties window. Click the Advanced button to bring up the following window that contains more settings.

  • Page 52: Using The Audio Function

    M510C Series Notebook PC 2.8 Using the Audio Function Connecting Audio Devices Your Notebook PC is equipped with a audio subsystem. However, you can also connect the external audio devices for a better audio quality when enjoying your music and movie on the computer. The audio-out jack ( ) allows you to connect the speakers and headphones;...

  • Page 53: Volume Control

    Volume Control Double-click the Volume Control icon on the taskbar, and the Master Volume dialog box will appear as shown below. You can move the slide bar to adjust the volume. If the Volume Control icon does not appear on the taskbar, click Start and select Control Panel to open the Control Panel window.
  • Page 54 MS-XXXX Notebook 1 - 26...

  • Page 55: Using The Software Applications

    Using the Software Applications Your Notebook PC provides you with the useful software applications, as well as the required drivers for the system. 2 - 1...

  • Page 56: When Do I Need The Software Cd

    M510C Series Notebook PC 3.1 Using the Software CD The Software CD is a compact disk which provides the necessary drivers and software applications for your Notebook PC. When do I Need the Software CD? You want to install the operating system from your Windows Setup CD, but not from the Recovery CD that included in the package.
  • Page 57 If your computer is pre-installed with the Windows operating system when purchased, the required drivers should be installed in the system already. If not, you may need to install the drivers manually from the Software CD included in the package. Please contact your local dealer for driver update information.

  • Page 58: Advanced Features

    M510C Series Notebook PC 3.2 Advanced Feature Your Notebook PC provides you with a practical utility: Search Key. Click the Searchkey Utility item in the Autorun screen to install the program. The Search Key utility allows you to define/re-define the application to be launched when pressing the User-defined Quick Launch button.
  • Page 59 The desired program’s icon appears in the Search Key window, indicating that the program is defined to the button. Click Close . 3 - 5...

  • Page 60: Power Management

    Power Management This chapter tells you how to manage the power effectively, in order to maintain the longest battery life and increase the productivity when you are using the computer. 2 - 1...

  • Page 61: Introduction To The Power Source

    M510C Series Notebook PC 4.1 Introduction to the Power Source Your Notebook PC provides a universal AC adapter and a high-performance Li-ion battery in the package, and it can operate either on the battery’s power or AC power. The AC Adapter The AC adapter included in your Notebook PC is a universal AC adapter that can operate on any voltage ranging from 100 ~ 240V AC.

  • Page 62: The Battery Pack

    The Battery Pack The rechargeable Li-ion battery pack is an internal power source of the computer. A fully charged battery pack can supply power to the computer up to 6.5 ~ 7 hours, depending on the actual use of your computer. Charging the Battery The battery pack can be charged while it is installed in the Notebook PC.
  • Page 63 M510C Series Notebook PC If the Power Meter icon does not appear on the taskbar, you can configure the setting through Start menu. Click Start and select Control Panel to open the Control Panel window. Then, click the Performance and Maintenance item.
  • Page 64 Changing the Battery Pack You can purchase an additional battery pack from your local dealer, so that you can use it as a spare when traveling. To remove the battery pack: Confirm that the computer is turned off. Place the computer upside down gently. Locate the Battery Unlock Button on the bottom side of the computer.
  • Page 65 M510C Series Notebook PC Replacing the battery pack: Place the battery pack into the compartment. Press down the battery pack until a “click” sound. The battery pack will be locked automatically. Replacing the Battery Pack Do not try to disassemble the battery pack.

  • Page 66: Managing The Power

    4.2 Managing the Power The Windows XP operating system supports ACPI (Advanced Configuration and Power Interface), which allows you to manage the computer power easily and efficiently. With the ACPI function, the power can be distributed to different components individually according to their needs. This is helpful to provide you with the maximum battery usage or optimal system performance.
  • Page 67 M510C Series Notebook PC Under the Alarms tab, you can activate the battery alarm function by checking the options in Low battery alarm and Critical battery alarm fields. Once activated, adjust the slide bar to set up the low or critical power level (the default setting is 10%).
  • Page 68 Under the Advanced tab, you can set up the actions when pressing the power button, sleep button, and closing the LCD panel. Set up the Power buttons’ function: Stand by, Hibernate, or Shut down. Pressing [ Fn ]+[ F12 ] allows your computer to enter suspend mode immediately.
  • Page 69 M510C Series Notebook PC Under the Hibernate tab, you can activate Hibernation function by checking the Enable hibernation option. Check this option Hibernation is a very useful function of the Windows operating system. When you activate this function, the current and programs are saved to the hard disk drive.

  • Page 70: Intel® Speedstep

    Intel® SpeedStep™ Technology You Notebook PC is equipped with an Intel Mobile Processors with Intel SpeedStep technology, which allows you to customize high performance computing on your computer. When the computer is connected to the AC adapter, it can run the most complex business and Internet applications with maximum speed of processor.
  • Page 71 MS-XXXX Notebook 1 - 12...

  • Page 72: Bios Setup

    BIOS Setup BIOS (Basic Input/Output System) is a program for setting up the configuration of the computer. To take full advantage of your computer and connected peripheral devices, you should configure the system through BIOS Setup. This chapter provides the information of BIOS Setup Utility, and guides you to configure the system for optimal use.

  • Page 73: Using Bios Setup Utility

    M510C Series Notebook PC 5.1 Using BIOS Setup Utility When to Use BIOS Setup? You may need to run the BIOS Setup when: An error message appears on the screen during the system booting up, and requests you to run SETUP.

  • Page 74: Control Keys

    Control Keys You can use only the keyboard to control the cursor in the BIOS Setup Utility. Move the cursor left to select one menu title. Move the cursor right to select one menu title. Move the cursor up to select one item under the menu title. Move the cursor down to select one item under the menu title.

  • Page 75: Main Menu

    M510C Series Notebook PC 5.2 Main Menu Once you enter the BIOS Setup Utility, the Main menu will appear on the screen. The Main menu displays the system information, including the basic configuration. AMI BIOS This item displays the BIOS version and ID.
  • Page 76 System Time This item allows you to set the system time. The time format is <hour> <minute> <second>. System Date This item allows you to set the system date. The date format is <day> <month> <date> <year>. Day of the week, from Sun to Sat, which is determined by BIOS (read-only).

  • Page 77: Advanced Menu

    M510C Series Notebook PC 5.3 Advanced Menu The Advanced menu contains the I/O configuration of the system. Legacy USB Support Set to Enabled if your need to use any USB 1.1/2.0 device in the operating system that does not support or have any USB 1.1/2.0 driver installed, such as DOS.
  • Page 78 Intel(R) SpeedStep(tm) tech. This item allows you to enable or disable Intel SpeedStep technology. When set to Disabled, the system always operates in a conserve power mode (the processor works at 600MHz). If you want optimize the processor, set this item to Enabled, so that the processor’s speed will be controlled by the use of your operating system and applications.

  • Page 79: Security Menu

    M510C Series Notebook PC 5.4 Security Menu The Security menu contains the security settings, which protects your system against unauthorized use. Security Settings This field displays the status of security settings, including Supervisor Pass- word and User Password. Change Supervisor/User Password...
  • Page 80 Type the password you want, up to six characters in length, and then press [Enter]. The password typed now will replace any previously set password from CMOS memory. You will be prompted to confirm the password. Retype the password and press [Enter]. You may also press [Esc] to abort the selection and not enter a password.
  • Page 81 M510C Series Notebook PC Clear User Password If you have set the User Password, select this item to disable the User Password. Boot Sector Virus Protection The item is used to set the virus warning feature for IDE Hard Disk boot sector protection.

  • Page 82: Peripheral Menu

    5.5 Peripheral Menu The Peripheral menu contains the settings for your peripheral devices. Parallel Port Address This item is used to set the parallel port address. Setting options: Disabled, 378, 278, and 3BC. Parallel Port Mode This item allows you to select the operation mode for the onboard parallel port: Normal, Bi-Directional, EPP, and ECP.

  • Page 83: Boot Menu

    M510C Series Notebook PC 5.6 Boot Menu The Boot menu allows you to set the boot-up configuration. Quiet Boot This item enables you to show the vendor logo on the boot-up screen. Set- tings options: Disabled and Enabled. Network Boot Support This item allows you to enable or disable the network boot-up function.
  • Page 84 RTC Power On Timer When set to Enabled, you can set the date and time at which the RTC (real- time clock) alarm awakens the system from suspend mode. 5 - 13...

  • Page 85: Exit Menu

    M510C Series Notebook PC 5.7 Exit Menu The Exit menu contains options of exiting BIOS Setup Utility. Save Changes and Exit Save the changes you have made and exit the utility. Discard Changes and Exit Exit the utility without saving the changes you have made.

  • Page 86: Expanding And Upgrading

    Expanding and Upgrading You can expand the capabilities of your Notebook PC and upgrade your system for your necessary. This chapter introduces the installation of optional devices/components for your Notebook PC. 2 - 1...

  • Page 87: Connecting The External Devices

    M510C Series Notebook PC 6.1 Connecting the External Devices The I/O (input/output) ports on the rear panel of the computer allow you to connect peripheral devices. For the information of these I/O ports, please refer to Quick Components Guide in Chapter 1.
  • Page 88 Connecting the External Monitor You can connect an external monitor to your computer through the VGA port for a larger view with higher resolution. To connect the monitor: Confirm that the computer is turned off. Plug the monitor’s D-type connector into the computer’s VGA port. Connect the monitor’s power cord, and then turn on the monitor.
  • Page 89 M510C Series Notebook PC Connecting the IEEE 1394 Devices The IEEE 1394 port of your computer is a next-generation serial bus that features a high-speed transfer rate and the connection of up to 63 devices, allowing you to connect many high-end peripheral devices and consumer electronic appliances, such as the DV (digital video camera).

  • Page 90: Connecting The Communication Devices

    Connecting the Communication Devices Using the LAN The RJ-45 connector of the computer allows you to connect the LAN (local area network) devices, such as a hub, switch, and gateway, to build a network connection. This built-in 10/100 Base-T LAN module supports data transfer rate up to 100Mbps.
  • Page 91 M510C Series Notebook PC Using the Modem The built-in 56Kbps fax/data modem allows you to use a telephone line to communicate with others, or to dial-up to connect the Internet. The following diagram provides the basic connection of modem. For more instructions or detailed steps on dialing-up through the modem, please ask your MIS staff or Internet service provider (ISP) for help.

  • Page 92: Installing The Pc Card

    Installing the PC Card The PC card slot of your computer allows you to install comprehensive Type- II PC cards that support various functions for your necessary, including the LAN/WLAN card, modem card, and memory card. The following instruction provides you with a basic installation for the PC card, including how to install and remove it.
  • Page 93 M510C Series Notebook PC Removing the PC card Press the Eject Button to make it stretch out. Push the Eject Button ( ) and the PC card will slide out slightly. Then, pull it out of the slot ( ).

  • Page 94: Safely Remove Hardware

    6.2 Safely Remove Hardware If you connect any peripheral device to your system, the Safely Remove Hardware icon ( ) will appear on the taskbar. Double-click the icon to bring up the Safely Remove Hardware dialog box. You can see all connected peripheral devices here.

  • Page 95: Upgrading Your System

    M510C Series Notebook PC 6.3 Upgrading your System You can upgrade your Notebook PC through the following ways: 1) adding memory to a maximum of 2GB. 2) replacing the hard disk drive. 3) replacing the CPU. Please NOTE that system upgrade should be done by an authorized retailer or service representative;...

  • Page 96: Caring Your Notebook Pc

    Caring Your Notebook PC To ensure a trouble-free operation and reduce the risk when working, you should take good care of your computer. This chapter provides the basic guidelines to protect your computer and critical data. 2 - 1...

  • Page 97: Protecting Your Notebook Pc

    M510C Series Notebook PC 7.1 Protecting Your Notebook PC We understand that the Notebook PC is a valuable investment and how important the data stored in your system meant to you. Therefore, we provide the following suggestions to protect your system.

  • Page 98: Setting Up Password

    Setting Up Password Power-on Password You can protect your computer from unauthorized use by setting up a boot password. Once the boot password is set, it will bring up a dialog box requesting for the password whenever the computer is turned on. The boot password is stored in the BIOS.

  • Page 99: Using The Anti-Virus Protection

    M510C Series Notebook PC Using the Anti-Virus Protection About Computer Virus In one word, the computer virus is a program that replicates; therefore, it will need to attach itself to other program files, such as .exe, .com, .dll files. The virus start to wreak havoc within the computer whenever these executable programs execute.

  • Page 100: Tips For Traveling

    7.2 Tips for Traveling With your Notebook PC, you can use the computer with more versatility, and in more situations than ever before. Empowered by its light weight design and optimized battery life, you can bring it to presentation and meetings whenever and wherever you want.

  • Page 101: Taking Care Of Your Computer

    M510C Series Notebook PC 7.3 Taking Care of Your Computer The guidelines provided in this section are the basics to take good care of your computer. Placing and Operating Your Computer The guidelines provided in this section are the basics to take good care of your computer.

  • Page 102: Cleaning Your Computer

    Cleaning Your Computer TURN OFF the computer when you have to clean it. Clean your computer by using a soft, dry cloth ONLY; do not use the alkaline detergent to wipe the exterior of the computer. Do not clean the LCD panel by using the alcohol or detergent. Only use the soft, lint-free cloth to wipe the LCD panel gently.
  • Page 103 M510C Series Notebook PC Conserving Battery Power Efficient battery power is critical to maintain a normal operation of the system. If the battery power is not managed well, your saved data and customized settings may be lost. Follow these tips to help optimize battery life and avoid a sudden power loss.

Table of Contents