1. Manuals
  2. Brands
  3. Gericom Manuals
  4. Laptop
  5. Hollywood 8060
  6. User manual

Gericom Hollywood 8060 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
Part Number: 5615 6731 0013 R00
(November 2002)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hollywood 8060 and is the answer not in the manual?

Questions and answers

Related Manuals for Gericom Hollywood 8060

Summary of Contents for Gericom Hollywood 8060

  • Page 1 User’s Manual Part Number: 5615 6731 0013 R00 (November 2002)
  • Page 2 TRADEMARKS All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice.

  • Page 3: Regulations Information

    Regulations Information Class B Regulations Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 4 FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

  • Page 5: Caution Texts Concerning Lithium Batteries

    About the Battery Caution Texts Concerning Lithium Batteries DANISH ADVARSEL! Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. NORWEGIAN ADVARSEL: Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten.

  • Page 6: About The Modem

    Attention (for USA Users) The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal.

  • Page 7: Table Of Contents

    Table of Contents Preface ..................v Chapter 1 Getting Started............1-1 Getting the Computer Running..........1-2 Unpacking ................1-2 Connecting to AC Power ...........1-2 Opening the Cover .............1-3 Turning On and Off the Computer........1-4 Taking a Look at the Computer ..........1-6 Right-Side Components .............1-6 Left-Side Components ............1-7 Rear Components...............1-8 Front Components..............1-9...
  • Page 8 Windows Keys ..............2-7 Function Keys ..............2-7 Fn Key................2-8 Hot Keys ................2-8 Using the Touchpad ...............2-10 Configuring the Touchpad ..........2-12 Using the Floppy Disk Drive ..........2-13 Connecting the Floppy Disk Drive ........2-13 Inserting and Ejecting Floppy Disks ........2-14 Using the Hard Disk Drive ............2-15 Changing the Hard Disk Drive.........2-15 Using the CD/DVD Drive............2-18 Inserting and Removing a CD..........2-19...
  • Page 9 Chapter 4 Expanding Your Computer ........4-1 Connecting an External Monitor ..........4-2 Connecting a TV..............4-3 Connecting a Parallel Device...........4-5 Connecting a USB Device ............4-6 Connecting an IR Device............4-7 Connecting an IEEE 1394 Device ...........4-9 Using PC Cards ..............4-10 PC Card Type..............4-10 CardBus Support..............4-10 Inserting and Removing a PC Card........4-10 Internal Components Upgrade..........4-12...
  • Page 10 Battery Pack Guidelines .............7-5 When Traveling ...............7-6 Chapter 8 Troubleshooting ............ 8-1 Preliminary Checklist ..............8-2 Solving Common Problems .............8-3 Battery Problems..............8-4 CD Drive Problems ............8-4 Display Problems ...............8-5 Floppy Disk Drive Problems..........8-7 Hardware Device Problems..........8-8 Hard Disk Drive Problems ..........8-8 Infrared Problems...............8-8 Keyboard, Mouse, and Touchpad Problems ......8-9 LAN Problems ..............8-10...

  • Page 11: Preface

    Preface This manual contains information that will help you operate the computer. It is divided into 8 chapters, an appendix, and an index. Chapter 1, Getting Started, takes you through the process of setting up the computer and identifying its external components. Chapter 2, Operating Your Computer, tells you how to use the computer’s components and features.

  • Page 12: Notational Conventions

    Notational Conventions Throughout this manual, the following conventions are used to distinguish elements of text. NOTE: identifies additional information that requires special attention. CAUTION: identifies important information which, if not followed, may result in loss of data or damage to the computer. Keyboard keys are shown in a bold typeset.

  • Page 13: Chapter 1 Getting Started

    CHAPTER Getting Started Congratulations on purchasing this computer. Your computer incorporates desktop computer capabilities into a compact notebook-sized package. It can greatly enhance your productivity either in the office or at home. And, of course, wherever you need it, the computer is ready and easy “to go.” This chapter first tells you step by step how to get the computer up and running.

  • Page 14: Getting The Computer Running

    Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items: Notebook computer Accessories: − AC adapter − AC power cord −...

  • Page 15: Opening The Cover

    2. Plug the DC cord of the AC adapter to the power connector on the rear of the computer ( ). 3. Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet ( ). 4.

  • Page 16: Turning On And Off The Computer

    Turning On and Off the Computer Turning On 1. Make sure that the computer is connected to AC power. 2. Press the power button. 3. Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows should start. Getting Started...

  • Page 17: Operating System

    Turning Off To turn off the computer power, use the “Shut Down” command of your operating system. NOTE: There are other ways you can stop the computer so that you will be back to where you left off when you next turn on the computer. (See “Stopping the Computer” in Chapter 2 for information.) CAUTION: If you have to turn the computer on again immediately after turning it off, wait for at least five seconds.

  • Page 18: Taking A Look At The Computer

    Taking a Look at the Computer This section identifies the external components of the computer and briefly describes the function of each component. NOTE: Depending on the model you purchased, the appearance of your computer may not be exactly the same as those shown in this manual. Right-Side Components Component Description...

  • Page 19: Left-Side Components

    Left-Side Components Component Description See Also Ventilation Do not cover or block the ventilation openings for air circulation thus preventing overheating. Openings CD/DVD/ Accepts a compact disc (CD) for installing or P. 2-18 CD-RW/ loading software, accessing data, and playing music/video.

  • Page 20: Rear Components

    Rear Components Component Description See Also Connects the AC adapter. P. 1-2 Power Connector Each of the two ports connects a USB device, P. 4-6 USB Ports such as a floppy disk drive, printer, digital camera, joystick, and more. IEEE 1394 Port Connects a 1394 device such as a scanner, P.

  • Page 21: Front Components

    Front Components Component Description See Also Top Cover Locks the top cover. P. 1-3 Latch Volume Control Decreases the sound volume of the P. 2-24 computer. Increases the sound volume of the computer. CD Player Stop/eject P. 2-20 Buttons Play/pause Previous track Next track CD player function on/off...

  • Page 22: Bottom Components

    Bottom Components Component Description See Also Inside is the memory slot for expanding the P. 4-12 Memory Slot memory size of your computer. Mini PCI Slot Inside is the Mini PCI slot for using an optional P. 2-28 Mini PCI card. Supplies power to your computer when external P.

  • Page 23: Top-Open Components

    Top-open Components Component Description See Also LCD Screen Displays the output of the computer. P. 2-20 Show the current status of the computer’s Device Indicators devices. Wireless LAN indicator P. 2-29 CD/DVD drive in-use indicator P. 2-19 Hard disk drive in-use indicator P.
  • Page 24 Component Description See Also Stereo Speaker Sends out sound and voice from the computer. P. 2-24 Touchpad Serves as the pointing device of the computer. P. 2-10 Receives sound and voice for the computer. P. 2-24 Microphone Battery Charge Glows green when the battery is fully charged P.

  • Page 25: Where To Go From Here

    Where to Go from Here As your computer is ready for operation, you may want to do any of the following now: For this purpose... Do this... To know more about the computer... Go on to the next chapter. To install the operating system if your See the operating system manual.

  • Page 27: Chapter 2 Operating Your Computer

    CHAPTER Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user but are new to notebook computers, you may choose to read only the parts containing information unique to your computer.

  • Page 28: Starting And Stopping The Computer

    Starting and Stopping the Computer There are a number of ways to start and stop the computer. Starting the Computer You always start the computer using the power button. A computer starts up with an operating system (OS) existing on the storage device such as the hard disk and floppy disk.
  • Page 29 this mode... resume again Hibernation Depending on your settings in Windows, Press the power you can put the computer in Hibernation button. mode by: • Closing the display cover • Pressing Fn+F12 • Pressing the power button If you choose to stop in Standby or Hibernation mode, you can return to where you left off the next time you start up the computer.

  • Page 30: Using The Keyboard

    Using the Keyboard Your keyboard has all the standard functions of a full-sized computer keyboard plus a key added for specific functions. The standard functions of the keyboard can be further divided into four major categories: Typewriter keys Cursor-control keys Numeric keys Function keys Typewriter Keys...

  • Page 31: Cursor-Control Keys

    Pressing Fn and this key toggles Scroll Lock on and off. When on light on), the screen moves one line up or down when you press ↑ or ↓ arrow key. Scroll Lock does not work for all programs. Pressing this key toggles the Caps Lock on and off. When on light on), the Caps Lock keeps the letter keys in uppercase.

  • Page 32: Numeric Keypad

    Moves the cursor right one space. Moves the cursor up one line. Moves the cursor down one line. Moves the page up. Moves the page down. Moves the cursor to the beginning of the line or document. Moves the cursor to the end of the line or document. Switches typing between insert and overtype modes.

  • Page 33: Euro Symbol

    When the numeric keypad is activated and you need to type the English letter in the keypad area, you can either turn Num Lock off or you can press and then the letter without turning Num Lock off. Some software may not be able to use the numeric keypad on the computer. If so, use the numeric keypad on an external keyboard instead.

  • Page 34: Fn Key

    Hot key functions are assigned to , and by your computer. (See “Hot Keys” later in this chapter for information.) Fn Key key, at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key. The letter “Fn” and the alternative functions are identified by the color of blue on the keytop.
  • Page 35 Description Switches the wireless LAN on and off. NOTES: This function works only if an optional Mini PCI wireless LAN card is installed. The default setting is On. The FAA (Federal Aviation Agency) has deemed it unsafe to operate wireless devices in aircraft as this may interfere with flight safety.

  • Page 36: Using The Touchpad

    Using the Touchpad CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface. NOTE: For optimal performance of the touchpad, keep your fingers and the pads clean and dry. When tapping on the pad, tap lightly. Do not use excessive force. The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons.
  • Page 37 Term Action Point Move your finger on the pad until the cursor points to the selection on the screen. Click Press and release the left button. -or- Tap gently anywhere on the pad. Double-click Press and release the left button twice in quick succession. -or- Tap twice on the pad rapidly.

  • Page 38: Configuring The Touchpad

    Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vise versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on.

  • Page 39: Using The Floppy Disk Drive

    Using the Floppy Disk Drive Depending on your model, an external floppy disk drive may be supplied with your computer. The floppy disk drive is referred to as drive A. A floppy disk drive allows you to install new programs into your computer, or to store information on a removable floppy disk so that you can transfer information from one computer to another.

  • Page 40: Inserting And Ejecting Floppy Disks

    NOTES: Depending on your model, there may be a core on the floppy disk drive cable. Do not put the floppy disk drive upside down. Do not put the AC adapter on the floppy disk drive. Inserting and Ejecting Floppy Disks To insert a floppy disk, hold it with the arrow facing up and towards the drive.

  • Page 41: Using The Hard Disk Drive

    Using the Hard Disk Drive Your computer comes with a hard disk drive as drive C. It is placed on a pull-out hard disk compartment that allows you to easily change it according to your needs. A hard disk drive is a storage device with non-removable, rotating, magnetic storage platters inside it.
  • Page 42 3. Slide the hard disk drive tray containing the hard disk drive out of the compartment. 4. Remove four screws securing the hard disk drive to the tray and replace with another drive. 2-16 Operating Your Computer...
  • Page 43 5. Replace the four screws to secure the hard disk drive to the tray and slide it back into the hard disk drive compartment. 6. Replace the hard disk drive compartment cover and secure with one screw. Operating Your Computer 2-17...

  • Page 44: Using The Cd/Dvd Drive

    Using the CD/DVD Drive Your computer comes with a CD/DVD drive, usually configured as drive The drive uses removable 5.25-inch silver discs, which look like standard music CDs. It is an ideal medium to use for distributing multimedia because of the huge amount of data that a disc can store. Depending on the model, your drive is one of the following: CD-ROM drive can read CD-ROMs, audio CDs, CD-R, and CD-RW discs.

  • Page 45: Inserting And Removing A Cd

    NOTE: For DVD-ROM and Combo drives only. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.

  • Page 46: Using The Cd Player Buttons

    Using the CD Player Buttons Your computer features CD player buttons. These buttons, located on the front panel, allow you to use your computer as a CD player, even without starting up the computer. Volume down On/off Volume up Next track Stop/eject Previous track Play/pause...
  • Page 47 While in Windows NOTE: To take advantage of the CD player buttons in Windows, the MPB (Media Player Buttons) driver supplied with your computer must be installed (see Chapter 6 for details). While in Windows, the CD player buttons work the same way as described above except that the on/off button is used to start Windows Media Player.

  • Page 48: Using The Video Features

    Using the Video Features The video subsystem of your computer features: 15.2-inch TFT (Thin-Film Transistor) color LCD display with 1280x854 WXGA+ Simultaneous display on LCD and external monitor, which is useful when you have a presentation as you can control the screen from your computer and face the audience at the same time.
  • Page 49 The following table lists the display modes supported by your computer. Display Mode LCD & CRT TV Only LCD Only Resolution Colors √ √ √ 800x600 16-bit √ √ √ 32-bit √ √ √ 1024x768 16-bit √ √ √ 32-bit √...

  • Page 50: Using The Audio Features

    Using the Audio Features NOTES: To take advantage of the enhanced audio capabilities, the audio driver supplied with your computer must be installed. If you experience interference while recording, try lowering the microphone recording volume. The audio subsystem of your computer features: Digital audio and analog mixing functions required for recording and playing sound on your computer Sound Blaster Pro, Adlib, and Microsoft Windows Sound System...
  • Page 51 Microphone Connector ( ) can be connected to an external microphone for recording voice or sound. Audio Input Connector ( ) can be connected to the line-out connector of a Hi-Fi set, radio set, synthesizer, walkman, etc. Audio Output Connector ( ) can be connected to the line-in connector of powered speakers with built-in amplifiers, headphones, or earphone set.

  • Page 52: Using The Communication Features

    Using the Communication Features Using the Modem NOTE: To take advantage of the modem feature, the modem driver supplied with your computer must be installed. The internal 56 K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or bulletin board.

  • Page 53: Using The Lan

    Using the LAN NOTE: To take advantage of the LAN feature, the LAN driver supplied with your computer must be installed. The internal 10/100Base-T LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 100 Mbps.

  • Page 54: Using The Wireless Lan

    Using the Wireless LAN Depending on your model, an internal Mini PCI wireless LAN (WLAN) card may have been pre-installed by your computer manufacturer at the factory. This card allows you to access corporate networks or the Internet in a wireless environment. The WLAN features include: IEEE 802.11b standard compliance 2.4 GHz DSSS (Direct Sequence Spread Spectrum) technology...
  • Page 55 Turning Off/On the WLAN NOTE: The FAA (Federal Aviation Agency) has deemed it unsafe to operate wireless devices in aircraft as this may interfere with flight safety. Remember to select turn off wireless LAN when using your computer in the airplane. Your computer has a built-in WLAN hot key to switch the WLAN on/off.

  • Page 57: Chapter 3 Managing Power

    CHAPTER Managing Power Your computer operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way. The topics in this chapter include: What is an AC adapter How to charge the battery pack...

  • Page 58: Ac Adapter

    AC Adapter CAUTION: The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your computer is for use in the country where you purchased your computer.

  • Page 59: Battery Pack

    Battery Pack The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience a shorter operating time.

  • Page 60: Initializing The Battery Pack

    Initializing the Battery Pack You need to initialize a new battery pack before using it for the first time or when the actual operating time of a battery pack is much less than expected. Initializing is the process of fully charging, discharging, and then charging.
  • Page 61 If you often rely on battery power for a long period of time while traveling, you may consider the purchase of an additional battery pack from your dealer and keep it with you in a fully charged state as a backup. To replace the battery pack, follow these steps: 1.

  • Page 62: Battery Low Signals And Actions

    Battery Low Signals and Actions Battery Low occurs when the battery has approximately 10% (Windows default setting) of its charge remaining. The computer gives warning beeps or messages and the Battery Charge Indicator ( ) blinks red to alert you to take actions. NOTE: You can set up your threshold and signals of Battery Low under Windows.

  • Page 63: Power Management

    Power Management Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows 2000 and Windows XP, power supply to different computer components is controlled on an as-needed basis.

  • Page 64: Hibernation

    Hibernation Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and normally they all have to be closed before the system can be turned off. When you use the hibernation feature, you do not have to close the applications.

  • Page 65: Power-Saving Tips

    Power-Saving Tips In addition to your computer’s automatic power management, you can do your part to maximize the battery’s operating time by following these suggestions. Do not disable Power Management. Decrease the LCD brightness to the lowest comfortable level. Disable the parallel port if no devices are connected to these ports. (See “Components Menu”...

  • Page 67: Chapter 4 Expanding Your Computer

    CHAPTER Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. This chapter gives guidelines on installing and using these devices: External monitor Parallel device USB device...

  • Page 68: Connecting An External Monitor

    Connecting an External Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external CRT monitor to your computer. Follow this procedure to connect an external monitor: 1. Make sure that the computer is not turned on. 2.

  • Page 69: Connecting A Tv

    Connecting a TV For entertainment, conferences, or presentations, you can connect a TV to your computer. Follow this procedure to connect a TV: 1. Make sure that both TV System and TV Output Format items are set properly in the SCU program. (See “Components Menu” in Chapter 5 for information.) 2.
  • Page 70 If you are connecting to a TV with an S-video to AV cable: first connect the black end of the S-video to AV cable supplied with the computer to the computer’s S-video connector. Then plug one connector of the video cable to the yellow end of the S-video to AV cable, and the other end of the cable into the video input connector of the TV.

  • Page 71: Connecting A Parallel Device

    Connecting a Parallel Device Your computer has a parallel port for connecting a parallel device such as printer. The port supports ECP (Extended Capabilities Port) and EPP (Enhanced Parallel Port) modes that turn the standard parallel port into a high-speed bi-directional peripheral port. Follow this procedure to connect a parallel device: 1.

  • Page 72: Connecting A Usb Device

    Connecting a USB Device NOTE: To take advantage of the USB 2.0 feature, the USB 2.0 driver supplied with your computer must be installed. (See chapter 6 for details.) Your computer has four USB ports that supports transfer rates up to 12 MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices, such as digital camera, scanner, printer, modem, and mouse.

  • Page 73: Connecting An Ir Device

    Connecting an IR Device Your computer has an IR (infrared) port for connecting an infrared- equipped device wirelessly such as another computer, printer, or PDA (Personal Digital Assistant). The infrared feature supports these standards: IrDA 1.1 (FIR – Fast Infrared) with 4.0 Mbps transfer rate IrDA 1.0 with 1.152 Mbps transfer rate Follow this procedure to connect an IR device: 1.
  • Page 74 Do not enter Standby mode. Do not use a cell phone or another IR device near the computer. Avoid strong light such as sunlight or fluorescent light. Disable the screen saver. Expanding Your Computer...

  • Page 75: Connecting An Ieee 1394 Device

    Connecting an IEEE 1394 Device Your computer has an IEEE 1394 port on the back of the computer for connecting 1394 devices. IEEE 1394 is the next-generation serial bus standard, featuring high-speed data transfer, multi-channel communication link, and “Hot Plug” connectivity. It allows connection of up to 63 devices. The applications include not only computer peripheral devices such as scanner, printer and high-quality CCD, but also consumer electronic equipment such as DVCAM and VCR.

  • Page 76: Using Pc Cards

    Using PC Cards Your computer has a PC card slot. PC cards are credit card-sized peripheral products based on the standards developed by PCMCIA (Personal Computer Memory Card International Association). PCMCIA is a non-profit association for promoting the interchangeability among mobile computers where ruggedness, low power, and small size are critical.
  • Page 77 2. Slide the PC card, with its label facing up, into the slot until the eject button pops out. Eject Button 3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process.

  • Page 78: Internal Components Upgrade

    Internal Components Upgrade You can upgrade your computer by changing the CPU or adding memory. However, to avoid damage during the installation procedure, please ask your dealer for help. Do not install an internal component by yourself. 4-12 Expanding Your Computer...

  • Page 79: Chapter 5 Using Bios Setup

    CHAPTER Using BIOS Setup System Configuration Utility (SCU) is a program for configuring the BIOS (Basic Input/Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand.

  • Page 80: When And How To Use Bios Setup

    When and How to Use BIOS Setup When to Use You need to run SCU when: You see an error message on the screen requesting you to run SCU. You want to restore the factory default settings. You want to modify some specific settings according to the hardware. You want to modify some specific settings to optimize system performance.

  • Page 81: Moving Around And Making Selections

    Startup Disks Components Power Exit Devices System CPU = Pentium® 4 Floppy Drive A = USB Floppy CPU Speed = 1600 MHz Primary Master = 40 GB Fujitsu MHM2200AT Memory Secondary Master = Base 640 KB CD-224E Extended = 261120 KB Shadow 176 KB IR Port 2...
  • Page 82 Using the Touchpad/Mouse You are advised to use the touchpad or mouse. It is more straightforward than using the keyboard. For most items, simply move the pointer with the touchpad/mouse and left-click on the intended item. To cancel your selection, click the right button.

  • Page 83: Startup Menu

    Startup Menu The Startup menu contains the basic configuration settings of the system, as well as the security settings, which safeguard your system against unauthorized use. Date and Time Boot Device Set Password Date and Time sets the system date and time. Boot Device sets the first, second, third, and fourth booting device.

  • Page 84: Disk Menu

    Disk Menu The Disk menu contains the security setting that safeguards your system against viruses. _ Virus Alert Virus Alert sets if a warning message will appear when the hard disk boot sector (partition table) has been changed. A checkmark ( ) indicates enabled, while an underline (_) indicates disabled.

  • Page 85: Components Menu

    Components Menu The Components menu contains the I/O configuration settings of the system. IR Ports LPT Port Pointing Device TV System TV Output Format Legacy USB NOTE: Incorrect settings in this menu may cause your system to malfunction. You are advised to keep the default settings.
  • Page 86 system supports EPP (Enhanced Parallel Port) and ECP (Extended Capabilities Port) standards, which turn the standard parallel port into a high-speed bi-directional peripheral port. The options are Standard AT (Centronics), Bidirectional (PS-2), Enhanced Parallel (EPP), and Extended Capabilities (ECP). This item is not valid for setting if the Port Address item is set to None.

  • Page 87: Power Menu

    Power Menu The Power menu contains the Power Management settings that help save power. SpeedStep Support SpeedStep Support allows you to set the CPU speed. Make sure that your CPU supports this function. The default setting is Automatic. Maximum Performance Allows the CPU to run in full speed. Battery Optimized Allows the CPU to run in low speed.

  • Page 88: Exit Menu

    Exit Menu The Exit menu displays ways of exiting SCU. After finished with your settings, you must save and exit so that the new settings can take effect. Save and Exit Exit (No Save) Default Settings Restore Settings Version Info Save and Exit saves the changes you have made and exits SCU.

  • Page 89: Chapter 6 Installing Software Drivers

    CHAPTER Installing Software Drivers To take full advantage of the unique features of your computer, some operating systems require custom software, known as drivers, to be installed. If you purchased the computer with Windows pre-installed, your dealer may have already installed the drivers. If not, you need to install the drivers using the CD supplied with your computer.

  • Page 90: How To Use The Driver Cd

    How to Use the Driver CD NOTES: The drivers may have been updated after this manual was published. For driver’s upgrade, please contact your dealer. You can always find the Readme or document files on the CD. These files contain the latest information from the software supplier.
  • Page 91 Name Directory Description Chipset driver \Intel\Chipset Ensures the full function of the following drivers. Install this main chipset driver before installing the device drivers. DirectX driver \Utility\DirectX Allows you to take full advantage of the multimedia applications. NOTE: For Windows 2000 only. Video driver \Win2000\Vga Installs the driver that allows you to...
  • Page 92 Name Directory Description WLAN driver \Wlan Installs the WLAN driver that allows (optional) you to use the internal Mini PCI Type-ⅢA WLAN card that has been pre-installed at the factory. NOTES: • The Windows Plug-and-Play capability may automatically detect the new device (Mini PCI WLAN card module) and display the wizard requesting for drivers.

  • Page 93: Chapter 7 Caring For The Computer

    CHAPTER Caring for the Computer Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer. This chapter gives you guidelines covering these areas of maintenance: How to protect the computer What to note when using and storing the computer How to clean the computer What to note when using the battery pack...

  • Page 94: Protecting The Computer

    Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using the Password The power-on password protects your computer against unauthorized use.

  • Page 95: Using An Anti-Virus Strategy

    Using an Anti-Virus Strategy New viruses are always being developed nowadays and they are attacking computers even more easily with emails so commonly used worldwide. The security feature of the BIOS protects the boot sector of the hard disk. To enable the function, see “Disks Menu” in Chapter 5 for instructions. You can also install a virus-detecting program to monitor potential viruses that could damage your files.

  • Page 96: Taking Care Of The Computer

    Taking Care of the Computer Location Guidelines Use the computer where the temperature is between 10°C (50°F) and 35°C (95°F). Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust. Do not cover or block any ventilation openings on the computer.

  • Page 97: Cleaning Guidelines

    Cleaning Guidelines Never clean the computer with its power on. Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer. Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the display.

  • Page 98: When Traveling

    When Traveling Before traveling with your computer, make a backup of your hard disk data into floppy disks or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure that the battery pack is fully charged. Make sure that the computer is turned off and the top cover is securely closed.

  • Page 99: Chapter 8 Troubleshooting

    CHAPTER Troubleshooting Computer problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems. It is divided into three sections: Preliminary checklist Solving common problems Resetting the computer...

  • Page 100: Preliminary Checklist

    Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: Try to isolate which part of the computer is causing the problem. Make sure that you turn on all peripheral devices before turning on the computer.

  • Page 101: Solving Common Problems

    Solving Common Problems For easy reference, the problems are divided into these categories. Problem Type Go to Battery Problems P. 8-4 CD Drive Problems P. 8-4 Display Problems P. 8-5 Floppy Disk Drive Problems P. 8-7 Hardware Device Problems P. 8-8 Hard Disk Drive Problems P.

  • Page 102: Battery Problems

    Battery Problems The battery does not charge (Battery Charge indicator does not light amber). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature. Make sure that the battery pack is installed correctly.

  • Page 103: Display Problems

    You cannot eject a CD. The CD is not properly seated in the drive. Manually release the CD following the method described next: 1. Turn off the system. 2. Insert a small rod, such as a straightened paperclip, into the drive’s manual eject hole and push firmly to release the tray.
  • Page 104 Bad dots appear on the display at all times. A small number of missing, discolored, or bright dots on the screen are an intrinsic characteristic of TFT LCD technology. It is not regarded as a LCD defect. Term definition: Bright dots When the LCD screen is lighted, dots appear bright at a dark area.

  • Page 105: Floppy Disk Drive Problems

    Make sure that the TV System and TV Output Format items are set correctly in the BIOS SCU program. Switch the display to the TV by changing the settings in Display Properties in Windows. Simultaneous display/multi-display does not work. Make sure that you turn on the external monitor before turning on the computer.

  • Page 106: Hardware Device Problems

    Hardware Device Problems The computer does not recognize a newly installed device. The device may not be correctly configured in the SCU program. Run the SCU program to identify the new type. Make sure if any device driver needs to be installed. (Refer to the documentation that came with the device.) Make sure if the device needs any jumper or switch settings.

  • Page 107: Keyboard, Mouse, And Touchpad Problems

    Make sure that the IrDA Fast Infrared Port is set to HP HSDL-2300/3600. Make sure that the IR port configuration is set correctly in the SCU program. If you are printing to an infrared printer, make sure that the appropriate driver is installed. If you are using any file transfer functions, make sure that both the computer and the IR device have the appropriate software running.

  • Page 108: Lan Problems

    The touchpad does not work, or the pointer is difficult to control with the touchpad. Make sure that the touchpad is clean. LAN Problems I cannot access the network. Make sure that the LAN driver is correctly installed. Make sure that the LAN cable is properly connected to the RJ-45 connector and the network hub.
  • Page 109 Consult your dealer or an experienced radio technician for help. I cannot connect to another WLAN device. Make sure that the WLAN feature is turned on. Make sure that the SSID setting is the same for every WLAN device in the network. Your computer is not recognizing changes.

  • Page 110: Modem Problems

    Modem Problems The modem does not work. Make sure that the modem driver is correctly installed. Make sure that the telephone line is properly connected. Make sure that the COM port in the communication software is correctly set. Turn off power management. PC Card Problems The PC card does not work.

  • Page 111: Printer Problems

    The computer does not resume from Standby or Hibernation mode. The computer automatically enters Standby or Hibernation mode when the battery pack is empty. Do any one of the following: − Connect the AC adapter to the computer. − Replace the empty battery pack with a fully charged one. The computer does not enter Hibernation mode with the keys.

  • Page 112: Software Problems

    Software Problems An application program does not work correctly. Make sure that the software is correctly installed. If an error message appears on the screen, consult the software program’s documentation for further information. If you are sure the operation has stop, reset the computer. (See “Resetting the Computer”...

  • Page 113: Startup Problems

    Check the volume control of your computer. Startup Problems When you turn on the computer, it does not respond and the Power Indicator does not light green. If you are using an external AC power, make sure that the AC adapter is correctly and securely connected.

  • Page 114: Other Problems

    Make sure that the hard disk is set correctly in the SCU program. Other Problems The date/time is incorrect. Correct the date and time via the operating system or SCU program. After you have performed everything as described above and still have the incorrect date and time every time you turn on the computer, the RTC (Real-Time Clock) battery is at the end of its life.

  • Page 115: Resetting The Computer

    Resetting the Computer You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If the system operation seems to hang up, first wait. It is possible that the system is processing data.

  • Page 117: Appendix A Specifications

    APPENDIX Specifications NOTE: Specifications are subject to change without any prior notice. Parts Specifications Intel Pentium 4 processor and Celeron processor Cache Memory 512 KB on-die for Intel Pentium 4 processor 256 KB on-die for Celeron processor ROM BIOS 512 KB Flash EEPROM System 2 x 200-pin DDR SO-DIMM socket for expansion, supports DDR-200/266 module, up to 1 GB...
  • Page 118 Parts Specifications I/O ports ECP/EPP parallel port, two USB ports (USB 2.0 support), FIR/SIR port, IEEE 1394 port Modem 56 Kbps V.90 MDC internal fax modem 10/100Base-T Wireless LAN Mini PCI (optional), IEEE 802.11b compliant Power AC adapter Universal AC adapter 90W; input: 100∼240V, 50/60Hz AC Battery 9-cell 2000 mAH / 3.7 V Li-Ion battery Dimension (W×D×H)

  • Page 119: Index

    Index Troubleshooting, 8-4 BIOS, 5-1 BIOS Setup, 5-1 Booting, 2-2 Brightness, 2-9 AC, 3-2 Buttons AC adapter, 3-2, A-2 CD player, 2-20 Connecting, 1-3 AC power Connecting, 1-2 ACPI, 3-7 Alt key, 2-4 Anti-Virus, 7-3 Cache, A-1 Audio CD player Caps Lock, 2-5 buttons, 1-9 Indicator, 1-11...
  • Page 120 Connector Connecting, 2-13 Audio input, 2-25 Ejecting floppy disks, 2-14 Audio output, 2-25 Inserting floppy disks, 2-14 Microphone, 2-25 Setting, 5-9 Core Troubleshooting, 8-7 IEEE 1394 cable, 4-9 Fn key, 2-8 Video cable, 4-3 Function key, 2-8 Cover Opening, 1-3 CPU, A-1 CPU speed BIOS setting, 5-10...
  • Page 121 Kensington lock, 1-8, 7-2 Operating system, 1-4, 2-2 Keyboard, 1-12, 2-4, A-1 Setting, 5-8 Troubleshooting, 8-9 Parallel device Connecting, 4-5 Parallel port, 1-8, 4-5 LAN, 2-27, A-2 DMA setting, 5-8 Connector, 1-8 Mode setting, 5-8 Driver installation, 6-3 Setting, 5-7 Troubleshooting, 8-10 Password, 5-5 LAN driver, 6-3...
  • Page 122 CD drive problem, 8-4 Display problem, 8-5 Floppy disk drive problem, 8-7 Saving power, 3-9 Hard disk drive problem, 8-8 Screen. See LCD Hardware problem, 8-8 Scroll, 2-11 Infrared problem, 8-8 Scroll Lock, 2-5 Keyboard problem, 8-9 Indicator, 1-11 LAN problem, 8-10 Security Modem problem, 8-12 BIOS setting, 5-5...
  • Page 123 Virus, 7-3 WLAN Virus alert, 5-6 Configuring, 2-28 Virus protection Driver installation, 6-4 Settings, 5-6 Indicator, 1-11 Volume control, 1-9, 2-24 Troubleshooting, 8-10 Turning off, 2-29 Turning on, 2-29 Using, 2-28 WLAN driver, 6-4 Weight of the computer, A-2 Windows, 1-4 Windows key, 2-7 Index...

Table of Contents