Operating Time Counter; Operating Time Reading; Displaying The Operating Time - Electrolux washing machine Service Manual

Washing machines with ewm 1000 plus electronic control system and “full smd” display board with sensor
Hide thumbs Also See for washing machine:
Table of Contents

Advertisement

11 Operating time counter

It is possible to display, with a specific procedure, the operating time of the appliance, which is counted
from the first switching on.
This option is available only in models with display. The maximum memorization capacity is 6550 operating
hours.
Only the operating time of normal programmes is displayed (not diagnostics cycles)
The actual time of the cycle performed is counted (not the pauses, the delayed start time, rinse hold
and the soak phases)
The memorization is 30 seconds for each programme
Only operating hours are displayed (1h and 59min = 1h)

11.1.1 Operating time reading

Version with ON/OFF button
1. Reset the set programme and switch the
appliance off.
2. Rotate the programme selector of three
positions clockwise.
3. Press the start/pause (8) and anyone of the
option buttons simultaneously and then, holding
the buttons down, switch the appliance on
with the ON/OFF button (on/off)
4. Keep the start/pause and option buttons down
till the LEDs start flashing (about 5 seconds).

11.1.2 Displaying the operating time

The operating time is displayed two digits at a time: the first pair of digits shows the thousands and
hundreds; the second pair shows tens and units.
For example, a total operating time of 6,550 hours will be displayed as follows:
1 →
Blank display for two seconds
SOI/DT 2005-01-dmm
Version with ON/OFF button incorporated in the
1. Cancel the set programme and switch the
appliance off.
2. Press the start/pause (8) and anyone of the
option buttons simultaneously and then, holding
the buttons down, switch the appliance on
rotating the programme selector of three
positions clockwise.
3. Keep the start/pause and option buttons down
till the LEDs start flashing (about 5 seconds).
2 →
The first pair of digits is
displayed for two seconds:
- thousands (6)
- hundreds (5)
45/49
selector
3 →
The second pair of two digits is
displayed for two seconds:
- tens (5)
- units (0)
599 36 86-11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ewm 1000 plus

Table of Contents