Siemens Hicom cordless EM Gigaset 3000 Micro Operating Instructions Manual page 55

Switching functions as of Version 3.0
The 4th line contains the display key symbols (see also
"Display when the handset is on or in message status
(example)" page 16). These symbols are used to call up and
activate functions. The symbols have the following meaning:
< >
=
S
The next few pages contain examples of how to execute cer-
tain functions via the dialog menu. All switching functions
are then listed in a table.
1 If activated (consult your system administrator if necessary)
Scroll (back and forth) to the desired and cur-
rently available function. The existing situation
(e.g. call status, conference) is not modified.
Confirm, execute or initiate the function dis-
played. The function can only be activated by
pressing this key.
Opens the service menu with additional func-
tions. Navigation in the service menu corre-
sponds to user prompts in the dialog menu. In
addition, the functions can be called up by enter-
ing codes (see page 68).
55
1