Hard Disk Security Submenu - Fujitsu Stylistic ST5100 Series Technical Reference Manual

Hard Disk Security Submenu

The Hard Disk Security Submenu allows you to enable or disable the Primary Master device. To access this submenu,
select Hard Disk Security from the Security menu.
Main
Drive0:
Set Master Password
Set User Password
Password Entry on Boot:
F1 Help
ESC Exit
Menu Field
Note that when a Master Password is set for a hard disk drive, the hard disk drive will only function in a system that has the
same hard disk drive password. If the drive is put into another system with no password or with a different password, the hard
disk drive will not work. Note, however, that the data on the drive is not encrypted.
The hard disk cannot be set or changed if the system is rebooted from the operating system. If you choose "Save Changes and
Power Off" in the Exit menu to shut down the system, then the hard disk password can be set or changed on the next boot.
Drive0
Set Master Password
Set User Password
Password Entry on Boot:
PhoenixBIOS Setup Utility
Advanced Exit Submenu
Hard Disk Security
Clear
[Enter]
[Enter]
[Enabled]
Select Item -
Enter
Select Menu
Table 2-13. Hard Disk Security Submenu Options
Options
Clear -----
----- -----
----- -----
• Disabled [Enabled]
• Enabled
Power Savings Exit
Item Specific Help
Space
Change Values F9
Select Sub-Menu F10
Default
Display only. Either Clear or Set, depending upon
whether a Master Password is entered in the
following field.
Allows you to enter a master password when a
supervisor password has been set.
Allows you to enter a user password when a
supervisor password has been set.
When set to disabled, the Hard Disk Password
entry is not required before OS boot. Note that the
hard disk is still password-protected without
password entry.
Setup Defaults
Save and Exit
Description
BIOS Setup Utility
2
23