Table of Contents
Advertisement
Security Menu Options
Security menu options for the Stylistic ST5100 Tablet PC are described in Table 2-12. Note that settings for some security
menu options determine whether other options are available.
Main
F1
ESC
Menu Field
Options
Supervisor
• Set
• Clear
Password Is:
User Password Is:
• Set
• Clear
Set Supervisor
(Tap on the setting
Password*
field for this option
or press the [Enter]
key to specify a
supervisor
password.)
Set User
(Tap on the setting
Password*
field for this option
or press the [Enter]
key to specify a
user password.)
Minimum User
[0]
Password Length:
* When both the Supervisor and User passwords are set, and a User password is used to enter the BIOS, the following Menu items can
be changed: Main -> Language, Advanced -> Video Features -> Display, Advanced -> CPU Features -> (all items), Advanced ->
Miscellaneous Configurations -> (all items), Advanced -> Events Logging -> View Event Log, Security -> Set User Password, Exit -> Exit
Saving Changes, Exit -> Exit Discarding Changes, Exit -> Save Changes.
PhoenixBIOS Setup Utility
Advanced
Security
Supervisor Password Is:
User Password Is:
Set Supervisor Password
Set User Password
Minimum User Password Length:
Password on Boot:
On Automatic Wake up:
Boot from Removable Media:
Flash Write:
Hard Disk Security
Owner Information
Security Chip Setting
Security Panel on Resume:
Help
Select Item
Exit
Select Menu
Table 2-12. BIOS Setup Security Menu Options
Default
Clear
Clear
-----
-----
-----
Boot
Info
Exit
Item Specific Help
Clear
Clear
Press [Enter] key to
set Supervisor Password
[Enter]
to enable any password
[Enter]
features.
[0]
[Disabled]
Then password entry is
[Disabled]
required to enter BIOS
[All]
Setup.
[Enabled]
[Enabled]
Space
-
Change Values
Enter
Select Sub-Menu
Indicates whether a supervisor password has been specified. (This field cannot
be changed directly. To enable or disable the supervisor password, enter a
new password or clear the old one using the Set Supervisor Password option.)
Indicates whether a user password has been specified. (This field cannot be
changed directly. To enable or disable the user password, enter a new
password or clear the old password using the Set User Password option.)
Specifying a supervisor password grants access to all password protected
Security menu options. When a supervisor password is enabled and a user
password is used to enter BIOS Setup, the user cannot access the following
Security menu options: Set Supervisor Password, Floppy Disk Access, and
Hard Disk Boot Sector. When enabled, a supervisor password (or user
password if used) is required to run BIOS Setup.
Specifying a user password grants access to the following Security menu
options only: User Password, Password On Boot. Other Security menu
options are not accessible. (When a supervisor password is enabled and a user
password is used to enter BIOS Setup, the user cannot access the following
Security options: Set Supervisor Password, Floppy Disk Access, Hard Disk
Boot Sector.) When enabled, a user (or supervisor) password is required to run
BIOS Setup.
Note that a supervisor password must be enabled before a user password can
be specified.
Set the minimum length for the user password. Once this field is set, the user
cannot enter any passwords less than the minimum length.
F9
Setup Defaults
F10
Save and Exit
Description
BIOS Setup Utility
2
21
Advertisement
Table of Contents
