Event Logging Submenu - Fujitsu Stylistic ST5100 Series Technical Reference Manual

Event Logging Submenu

The Event Logging Submenu allows you to configure DMI (Desktop Management Interface) event logging options. To
access this submenu, select Event Logging Submenu from the Advanced menu.
Event Log Capacity:
Event Log Validity:
View Event Log:
Event Logging:
System Boot Event:
Clear All Event Logs:
Mark Events as Read:
F1 Help
ESC Exit
Menu Field
Event Log Capacity -----
Event Log Validity -----
View Event Log • Enter
Event Logging • Disabled
• Enabled
System Boot Event • Disabled
• Enabled
Clear All Event Logs • No
• Yes
Mark Events as Read • Enter
PhoenixBIOS Setup Utility
Exit Submenu
Event Logging
Space Available
Valid
[Enter]
[Enabled]
[Disabled]
[No]
[Enter]
Select Item
Select Menu Enter
Table 2-11. Event Logging Submenu Options
Options Default
-----
-----
-----
[Enabled]
[Disabled]
[No]
[Enter]
Item Specific Help
Press <Enter> key to
view the contents of
the event log.
-/ Change Values F9
Space
Select Sub-Menu F10
Status of the event log is displayed.
Indicates whether data in the event log is valid.
Press the <Enter> key or select the [Enter] option to view the contents
of the event log.
Determines whether DMI event logging is enabled.
This option is only available when [Enabled] is selected for Event
Logging. When [Enabled] is selected, the event may be logged. When
[Disabled] is selected, the event is ignored.
Choose [Yes] to clear all DMI event logs at the next boot. (This setting
is reset to No after the event logs are cleared.)
Press [Enter] or press the <Enter> key to mark all events currently in
the event log as read. Marked events will not be displayed the next
time View Event Log is selected.
Setup Defaults
Save and Exit
Description
BIOS Setup Utility
2
20