Osd; Alarm - Siemens CFMC1315-LP Configuration

Configuration
9.3.5

OSD

9.4

Alarm

36
Building Technologies
Fire Safety & Security Products
The cropping function can be activated only with the correct streaming settings. See page
[ 23] .
Using this function you can set up the text position and colour of the camera name,
alarm text or date/time on the screen. To activate this function, the corresponding
ENABLE flag for each item must be set to "ON":
Camera Name Enable in the Network settings has been set to "ON". See page
[ 27] .
Text enable in Alarm settings has been set to "ON". See page [
Display in Date and Time setting has been set to "ON". See page [
1. Select Image Parameters > OSD.
2. Click OSD in the sub menu.
The following screen will appear.
3. Set the horizontal and vertical position and the colour of the camera name,
alarm text and date/time.
4. Click Save.
External alarm inputs and motion/activity detection can be set. When a sensor or
other device is connected to the alarm input terminal, an alarm will be triggered by
the external sensor. For example, by mounting a sensor to a door, an alarm will be
triggered each time the door is opened. By setting the integrated motion/activity
detection, an alarm will be notified when a change is detected by the camera.
37] .
51] .
CFMC1315-LP Configuration Manual EN
05/05/2009