Safety; General Safety Precautions; Transport; Installation - Siemens CFMC1315-LP Configuration

1

Safety

1.1

General safety precautions

1.1.1

Transport

1.1.2

Installation

Building Technologies
Fire Safety & Security Products
Read the general safety precautions before installing, configuring and
operating the device.
Keep this document for reference.
Please also take into account any additional country-specific, local safety
standards or regulations concerning project planning, operation and disposal of
the product.
Follow all warnings and instructions marked on the device.
Liability claim
Do not make any changes or modifications to the device unless they have been
approved by the manufacturer.
Use only spare parts and accessories that have been approved by the
manufacturer.
Damage during transport
Keep the packaging material for future transportation.
Do not expose the device to mechanical vibrations or shocks.
It is recommended that all preparatory work (e.g. fitting of accessories) be
carried out in a workshop prior to final installation.
Radio interference with other devices in the environment
When handling modules that are susceptible to electrostatic discharge, please
observe the ESD guidelines.
Damage due to unsuitable mounting location
The environmental conditions recommended by the manufacturer must be
observed. See section "Technical data".
Do not operate the device in dusty places.
Do not expose the device to mechanical vibrations or shocks.
CFMC1315-LP Configuration Manual EN
05/05/2009
Safety
5