Siemens CFMC1315-LP Configuration page 38

Configuration
38
Building Technologies
Fire Safety & Security Products
Motion ON: Activates motion/activity detection function.
Detection
OFF: Deactivates motion/activity detection function.
Area
1. Click Set Motion Area.
The motion setup screen will open.
2. Select the detection area by clicking/dragging the mouse.
Sensitivity High: An alarm will be triggered even when minor changes in brightness
occur within the defined area.
Mid: Intermediate between High and Low.
Low: An alarm will be triggered only when major changes in brightness
occur within the defined area.
Text Enable Select ON or OFF to define whether an additional alarm text defined in
the text field is to be overlaid on the video image. See page.
Text Define an individual text for alarm overlay.
Audio Output Select ON or OFF to define whether an additional audio message (*.wav),
pre-recorded on the SD card, is to be output via the Audio out connector.
Event Pre-recorded voice files with extension .wav that have been uploaded to
the SD memory card in advance can be selected as voice alarm
messages. Max. 4 different audio sources can be selected.
Alarm mode OFF: Alarm out disabled
Event: When alarm input 1 or alarm input 2 is triggered or motion is
detected, the alarm out will be triggered immediately as well.
CFMC1315-LP Configuration Manual EN
05/05/2009