Audio Upload; Alarm Server - Siemens CFMC1315-LP Configuration

9.4.2

Audio Upload

9.4.3

Alarm Server

Building Technologies
Fire Safety & Security Products
Output hold Set the alarm output hold time. This function is used when connecting to
time alarm output terminals and activating a siren, buzzer or emergency light.
You can choose which audio file (*.wav) you want to upload as a voice alarm
message to the SD card from your PC. There are 4 audio events available for
uploading. You can select in the appropriate menu which audio event is to be
played with which event (Motion or Alarm input 1).
1. Select Alarm > Audio Upload.
2. Click Browse to select the desired audio file on you hard disk.
3. Click Upload.
1. Select Alarm > Alarm Server.
2. Configure the options as described in the table below.
3. Click Save.
Conditions
Alarm server IP address
Alarm server port number
Alarm-input message
Choose alarm or motion event.
Define the target alarm server IP address.
Define the target alarm server port number.
Define the message (up to 64 characters) to be sent to the
alarm server when an alarm input is triggered.
CFMC1315-LP Configuration Manual EN
Configuration
39
05/05/2009