User List; Firewall; Ip Address Filter - Siemens CFMC1315-LP Configuration

9.8.2

User list

9.9

Firewall

9.9.1

IP Address Filter

Building Technologies
Fire Safety & Security Products
Besides the administrator, general users can be authorized by the system
administrator to access the camera.
1. Select Access protection > User List.
2. Configure the options as described in the table below.
3. Click Save.
ID Enter a login name for the new user.
Password Enter a password for the new user.
Password Re-enter the password.
(confirm)
Level Select a user type:
The "Advanced User" is allowed to view the live picture, to perform PTZ
control, and to define/store presets in the camera.
A "User" is allowed to view the live picture only.
Language Set the user language.
Reset Click Reset to delete your entries.
Add Click this button to add the new user to the user list.
Remove If you want to remove a user from the user list, click first Select and then
Remove.
All the IP addresses listed and enabled in this section will be allowed or denied to
pass the firewall.
1. Select Firewall > IP Address Filter.
2. Configure the options as described in the table below.
3. Click Save.
Configuration
CFMC1315-LP Configuration Manual EN
05/05/2009
53