Configuration - Siemens CFMC1315-LP Configuration

Configuration

9.10.3 Configuration
56
Building Technologies
Fire Safety & Security Products
3. Click Upload.
Rebooting the camera after a firmware update may take approx. 15 minutes.
Camera configuration information can be exported and saved to a personal
computer. It can also be imported from the personal computer to network cameras.
1. Select System > Configuration.
2. Perform the actions as described in the table below.
Import Click Import and select the configuration file to start importing the
Configuration settings to your network camera.
Settings
Export Click Export and choose a file directory to save the configuration
Configuration settings on your computer.
Settings
Set to Factory Clicking the Default button will reset the camera settings to the
Default factory default values.
NOTE: Basic settings of the IP camera such as the network IP
address and the camera name will not be reset.
CFMC1315-LP Configuration Manual EN
05/05/2009