Security Setup; [Security] - Kenwood DDX8034BTM Instruction Manual

Security Setup

You can set a security code to protect your
receiver system against theft.
⁄
• When the Security Code function is activated, the code
cannot be changed and the function cannot be released.
Note the Security Code can be set as the 4 digit number
of your choice.
1 Display the Security screen
>
Touch [ ] [ ]
(page 59)
2 Setup the SI (Security Indicator)
[Security Code Set] Displays the Security code
input screen.
[SI] Turns the SI function on or off.
If turned "ON", the SI indicator on the front
panel flashes when the vehicle ignition is off.
( "ON")
3 Start Security Code setup
⁄
• If you have already completed the code registration,
[CLR] is displayed.
4 Enter a security Code
Input four-digit number.
> >
[System]

[Security].

5 Register your security code
6 Reenter the security code
Reenter the same security code as that you have
entered in Step 4 for confirmation.
⁄
• If you enter a different security code, the screen
returns to Step 4 (for the first code entry).
7 Register the security code again
Now, your security code is registered.
If you have pressed the Reset button or if you
have disconnected the Receiver from battery...
1 Enter the correct security code
You must enter the same security code as that
you have entered in Step 4.
2 Register your security code
Now, you can use your Receiver.
English 63