Clock Setup; Security Setup; 2 Dnx5260Bt/Ddx5026/Ddx5056 - Kenwood DNX5260BT Instruction Manual

Setup Menu

Clock Setup

You can adjust the clock time.
1 Display the Clock Setup screen
>
Touch [ ] [
(page 58)
2 Setup the Clock
1 1 1
1 Adjusts hours.
2 Adjusts minutes.
[Reset] Sets "00" minute.
Setup examples: 3:00 – 3:29 \ 3:00
[Synchronize] Sets the clock time in
synchronization with the time data sent from
the navigation system or the RDS station.
( DNX series: "Navigation", DDX series: "RDS")
"OFF"/ "RDS"/ "Navigation"
When the synchronized mode is set, the clock
cannot be adjusted manually.
3 Adjust the clock time
62 DNX5260BT/DDX5026/DDX5056
> >
] [System] [Clock].
2 2 2
3:30 – 3:59 \ 4:00

Security Setup

You can set a security code to protect your
receiver system against theft.
⁄
• When the Security Code function is activated, the code
cannot be changed and the function cannot be released.
Note the Security Code can be set as the 4 digit number
of your choice.
1 Display the Security screen
>
Touch [ ] [
(page 58)
2 Setup the SI (Security Indicator)
[Security Code Set] Displays the Security code
input screen.
[SI] Turns the SI function on or off.
If turned "ON", the Security indicator on the
front panel flashes when the vehicle ignition is
off. ( "ON")
3 Start Security Code setup
⁄
• If you have already completed the code registration,
[CLR] is displayed.
4 Enter a security Code
Input four-digit number.
> >
] [System] [Security].