Security Code Setup - Kenwood DDX8022BT Instruction Manual

Setup Menu
"Full", "Just", "Zoom", "Normal"
; Returns to the "Mode Select 1" screen.
a Selects a screen mode of the rear view
camera (R-CAM) screen.
You can select any of the following screen
mode.
"Full", "Just", "Zoom", "Normal"
s Returns to the "SETUP Menu" screen.
⁄
• When you select the Menu or Navigation, the display is
shown in the full-size display mode automatically. The
screen mode of these displays cannot be changed.
• The picture qua¡lity can be set for each source.
Full picture mode ("Full")
Justify picture mode ("Just")
Zoom picture mode ("Zoom")
Normal picture mode ("Normal")
78 DNX8220BT/DDX8022BT

Security Code Setup

You can set a security code to protect your
receiver system against theft.
⁄
• When the Security Code function is activated, it cannot
be released.
Note that your Security Code is in the 4 digit number
entered in your "Car Audio Passport" in this package.
1 Display the Security Code Setup screen
Touch
Menu" screen (page 62).
1
2
1 Displays the Security code input screen.
2 Turns the SI function on or off.
If turned "On", the burglar alarm lamp
flashes when the vehicle ignition is off.
( "On")
3 Returns to the original screen.
2 Start Security Code setup
⁄
• If you have already completed the code registration, you
cannot touch [Set].
3 Enter a security Code
Input four-digit number.
in the "SETUP
3