Security Code Setup - Kenwood KVT-925DVD Instruction Manual

Setup Menu

Security Code Setup

You can set a security code to protect your
receiver system against theft.
When the Security Code function is activated it can't
be released.
Note, your Security Code is the 4 digit number
entered in your "Car Audio Passport" in this package.
1 Display the Security Code Setup screen
Security
If is not shown, touch
Security
Prev.
or to display it.
Next
4
1
3
Set
2
1
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (see page 76)
4 Calls the Setup Menu.
5 Allows you to start security code registration.
If you have already completed the code
registration, the Set is not displayed.
68 English
2 Start the security code registration
Set
PassWord
＊＊＊＊
1st
1
1 2 3
4 5 6
7 8 9
0
2
Clear
1 Enters a security code.
2 Clears your entry.
3 Cancels the registration and returns to the
1
Security Code Setup screen.
5 4 Enters the security code.
3 Enter a security code
0 — 9
1
Input a four-digit number.
4 Register your security code
Enter
5 Reenter the security code
Reenter the same security code as that you have
entered in Step 3 for confirmation.
If you enter a different security code, the screen
returns to Step 3 (for the first code entry).
6 Register the security code again
Enter
Your security code has been registered.
If you press the Reset button or if you disconnect
your Receiver from the battery after the code
registration, you need to enter the registered
security code.
See below for details.
If you have pressed the Reset button or if you
have disconnected the Receiver from battery...
1 Enter the correct security code
0
3
Cancel
You must enter the same security code as that you
have entered in Step 3 above.
2 Enter the security code
4
Enter
Now, you can use your Receiver.
If you enter an incorrect security code, you
cannot use your Receiver for a while.
Incorrect entry count
1
2
3
4 or more
9
—
Enter
Receiver inoperable
time
—
5 minutes
1 hour
24 hours
English 69