Remote Control Function - Kenwood KVC-1000 Instruction Manual

Remote Control Function

VOLUME buttons
Basic Source Control Function
• SRC button
Each time you press the SRC button, the source mode switches as follows:
Tuner mode
Disc changer mode
TV mode
Standby mode
NOTE
• The mode switches to the next mode from any mode which cannot be used.
• The tuner mode and disc changer mode will differ depending on the unit that is connected.
• VOLUME buttons
ª
Press the button to increase the volume.
·
Press the button to decrease the volume.
• ATT button
Turn down the volume quickly. To return the volume to its original level, press the button again.
• SP button
Switch to the built-in speaker mode.
• OPEN button
Open/Close the monitor.
NOTE
The " " button cannot be used.
Visual Function
• V.SEL button
Each time you press V.SEL button, the image video will switch between the navigation, television and video.
• MODE button
Each time you press MODE button, the screen mode switches between the full, zoom, just, cinema and
normal.
• FNC button
Press the FNC button to switch the source control screen.
Each time you press FNC button, the back picture in the source control screen changes.
• REAR AV button
Each time you press REAR AV button, the AV output mode switches between the normal, television and
video 2 (from the front AV-IN terminal).
28
+
–
TV/VD
ATT button
FM
+
DISC
MODE V.SEL
MODE button
OPEN
SRC button
SRC
4
¢
TUNE
TRACK
38
AM
–
M/S
V.SEL button
FNC
FNC button
AME REAR AV
REAR AV button
SP
SP button
OPEN button