Dab Control Screen (Shift); Selecting The Seek Mode; Auto Memory Entry; Dual Channel Audio Switching - Kenwood KVC-1000 Instruction Manual

DAB Control Screen (Shift)

T I
P -
DAB 1 P 1
E N S E M B L E L A B E L # #
AUTO ALM
AME
SEEK SUB

3 Selecting the Seek Mode

Each time you touch [ SEEK ], the mode switches as
follows:
AUTO (Auto Ensemble Seek)
MANU (Manual Seek)

3 Auto Memory Entry

You can automatically store all the receivable
frequencies in the band currently being listened
to, and then recall them with the touch of a
button later. This function is especially useful
when you are travelling and do not know what
stations are available. Up to 6 frequencies can be
stored this way.
1
Select the band for auto memory entry.
2
Touch [ AME ].
[ ¢ ] and [ 4 ] blink.
3 Touch [ ¢ ] or [ 4 ] to start auto memory entry.
The preset station numbers [ P1 ] - [ P6 ] are shown
in order.
When all the stations on a certain band have been
stored in the preset memory, the auto memory
entry stops. The tuner then plays the last station
received.
Recalling a Preset Station:
Touch the preset station number [ P1 ] - [ P6 ] for the
desired station. The number of the recalled station is
displayed.

3 Dual Channel Audio Switching

The Dual Channel Audio can be switched between
Main and Sub.
Touch [ SUB ] to switch the dual channel audio
between main and sub.
NOTE
When "SUB" is selected, the sub audio continues to
be received even when the service is switched to
another, provided that the new service also
broadcasts a dual channel audio programme.
<See KTC-959DAB Instruction Manual for details on DAB functions>
M E N U 1 2 : 0 0
D A B P +
1 4 5 1 . 0 7
NEWS REG AF
MAIN DAB DRC PR
BAND
PTY
P/S TI VOL TITLE

3 Primary/Secondary Switching

Each time you touch [ P/S ], the service switches as
follows:
2
# Primary
TI
Secondary 1
Secondary 2
3 Presetting the Volume Level for Traffic
Information/News
Preset the volume level to be used when traffic
information/news start to be broadcast.
1
Tune into the station for which you want to set the
volume.
2
Adjust the volume to the desired level.
3
Keep touching [ TI VOL ] for two seconds or more.
The volume level that has now been stored.
Future traffic information/news broadcasts are
heard at the preset level.
NOTE
• The volume level cannot be lowered by this function
during tuner reception. The volume is only set when
it is louder than the current listening volume of the
tuner.
• When the volume level is set to minimum, it is still
possible to listen to traffic information bulletins at
preset volume.
3 Returning to the DAB Control Screen
(Main)
Touch [ ] to return to the DAB control screen
(Main).
23