Switching The Av Output Picture; Turning The Monitor Picture Off; Switching To The Source Control Screen; Changing The Background Of The Source Control Screen Picture - Kenwood KVC-1000 Instruction Manual

Monitor Control Function
TOUCH PANEL
MULTIPLE SOURCE CONTROL
MODE
Video input terminal (AV-IN 2) (3.5ø-Monaural)
Audio input terminal (AV-IN 2) (3.5ø-Stereo)
6
MODE
FNC V.SEL
KVC-1000 6.5-inch WIDE COLOR LCD TELEVISION
SCRN
AV OUT SEL.
V.OFF
VISUAL
V.SEL
FNC
SCRN

3 Switching the AV Output Picture

Each time you press the V.SEL button for one second
or more, AV output picture switches as follows:
NORMAL : Picture selected from the TV control
TV : Picture of television
VD2 : Picture input from the front AV-IN
NOTE
The unit will not operate when the "IN-OUT" switch is
set to "IN" (Page 32).
3 Switching to the Angle/Screen Control
AUDIO
Screen
Pressing the SCRN button will cause the angle
control screen(monitor angle adjustment mode) or
screen control screen (screen adjustment mode) to
be displayed on the TV or video picture (Page 7).

3 Turning the Monitor Picture Off

Hold down the SCRN button for two seconds or
more to turn the monitor's picture off.
NOTE
The picture reappears when the one of the SCRN,
FNC, MODE or V.SEL buttons is pressed.

3 Switching to the Source Control Screen

Press the FNC button to switch to the source control
screen (Page 15-27).
3 Changing the Background of the Source
Control Screen Picture
Each time you press the FNC button, you can select
the background between 5 different patterns for the
source control screen and menu screen.

3 Adjusting the Volume

When the KTC-1000R/A907 is not connected to
the system
Press the 5 button to increase the volume of the
built-in speaker.
Press the ∞ button to decrease the volume of the
built-in speaker.
When the KTC-1000R/A907 is connected
Press the 5 button to increase the volume of the
KTC-1000R/A907.
Press the ∞ button to decrease the volume of the
KTC-1000R/A907.
screen(Page 15)
terminal