Adaptability To The Customer's/System Needs - Hitachi RWM-(H)FSN3E Technical Catalogue

2 Features and benefits

2.1.3 Adaptability to the customer's/system needs

As it have been seen in the Introduction, depending on the type of heating installation system (existing or new) and the
user's needs, the most suitable system for each situation can be chosen with:

Space heating
Three main system configurations:
• Mono-valent systems (Heater disabled)
• Mono-energy systems (Heater enabled)
• Parallel bi-valent systems (For boiler combination)
Selecting the different configuration types it is possible to adapt the system to all customer requirements, providing a wide
application range from the simplest configuration to complete configuration, as shown below:
Radiator/(fan coil), heating floor or both (2nd temperature area). Also combinable with the following options:
- Domestic Hot Water (DHW)
- Use of electric heater, boiler or both for low ambient temperature conditions.
- Solar combination for DHW

Space cooling
Fan coil, refreshing floor or both (2nd temperature area). Also combinable with the following options:
- Domestic Hot Water (DHW)
Solar combination for DHW
-
- Swimming pool combination in summer season period (Heating mode)
N O T E
For the typical installation examples, please refer to the section Installation
Wide range of accessories
In order to enable all the possible system configurations explained previously, there are available a large set of accessories
designed to adapt the unit to the type of installation which the system needs.
N O T E
For knowing the different accessories that offers the system, please refer to the section Accessory code
chapter General information.
24
TCGB0070 rev.3 - 04/2012
configurations.
list on