K-sun PearLabel 400iXL User Manual page 9

Take care not to spill any beverages such as tea, coffee or juice
onto the printer, or to spray aerosol insecticide. It may cause
malfunction, fire, or electric shock. If any liquid has been spilled
on the printer, turn off the power, unplug the AC adapter
immediately and then contact the K-Sun® customer support
center. Continuous use may result in fire or electric shock.
Do not touch the printhead because it becomes very hot. There
is a risk of burns.
Do not attempt to disassemble or modify the printer. Doing
so may result in fire or electric shock. Always use the printer as
instructed in this guide, otherwise damage or injury may occur.
Do not disconnect the AC adapter and USB cable from printer
without first turning off the printer with the power button,
otherwise the printer may malfunction.
If these problems occur, turn off immediately, unplug the AC
adapter and then contact K-Sun® customer support center.
• If smoke, strange odors or unexpected noises come from printer.
• If liquid or foreign objects get inside the printer.
• If the printer has been dropped or damaged.
Handling tape and ribbon cartridges
• Do not drop them or disassemble them. Doing so may cause
damage.
• Do not pull or push in the tape protruding from the tape outlet slot.
Doing so may damage the printer.
• Store the cartridges in a cool dark place away from direct sunlight,
heat, moisture and dust.
• After unpacking, use the cartridges as soon as possible.
Using printed labels
• Carefully check the suitability of the label for the intended
purpose before use. K-Sun® Corporation takes no responsibility for
any damage or loss.
PEARLabel® 400iXL UsER's GUidE
9