K-sun PearLabel 400iXL User Manual page 14

4
Select your printer, and
click [Next].
If a security confirmation
screen appears, click a
button to install.
5
Connect the AC
Adapter.
Make sure to use the
dedicated AC Adapter
K-Sun® Corporation
model: AST2437Y1-1
6 Connect the printer to your
computer with the supplied
USB cable.
(Do not use USB hub.)
7
Press
8 When the completion message appears, click [Finish].
THIS IS THE EnD Of THE InSTAllATIOn PROCESS
if you have installed Maxilabel® pro Ver 5.0 on Windows® 8.0 and then upgrade
to Windows® 8.1 you will need to reinstall the drivers. unplug usB from printer.
insert your cd into the drive and run setup.exe. choose Modify, install driver
only. follow instructions on screen to complete the driver install process.
14
PEARLabel® 400iXL UsER's GUidE
to turn on the power.