problem
tape has jammed.
Before use
Connecting to your computer
Make sure to install software and the printer driver onto your computer first.
Then connect the printer to your computer.
1
Insert the MaxiLabel®
Pro Ver 5.0 CD-ROM
2
Click [Install
application and driver]
3
Click [Agree] on the software license agreement screen. Follow the on-screen
instructions to install software. Printer driver is installed after software installation.
solution
Is the tape wrapped around the platen roller? Open the top
cover and remove the tape cartridge. If the cartridge cannot
be removed.
1. Press and hold
and
2. Remove the tape from the roller.
If you cannot remove the entire tape at once, go back to step
1 and try again until the tape is removed.
CONTINUED
PEARLabel® 400iXL UsER's GUidE
until the roller turns in reverse.
13