cleaning printhead and platen Roller
caution
Before you start cleaning, turn off the power and unplug the AC adapter.
eXteRioR: Wipe the dirt off with a soft cloth, if very dirty, use a cloth
wrung out of water to clean.
Do not use chemicals or solvents such as benzine, thinner or acetone. Do not use a
chemical duster.
pRinthead: Clean with a cotton swab.
10
PEARLabel® 400iXL UsER's GUidE
platen RolleR:
1. Open the top cover
2. While holding down the FEED button
press ON button
3. After the roller stops, unplug the AC adapter.
4. Clean the roller.