Table of Contents
Advertisement
Installer
Clean Display
Config
Upon entering the advanced menus, the Advanced Fault Menu
is displayed. The display will change to the Fault Screen and
indicate any faults that may be present in the indoor or outdoor
equipment. If a fault is present, the Fault Screen will show the
equipment and an error code with a description of the fault.
_
Touch
or
keys to view the fault status of any remaining
+
equipment. The text "NO FAULTS" will be scrolled if no errors
are present.
Call for Service
Advanced
Menu
Run
Schedule
Touch the
or
to step through the list of installed equip-
ment, including the thermostat. Touch the Installer Config
key to enter the submenus for the equipment displayed. The
text "WORKING" will be displayed in the scrolling display
area while the data is being retrieved. The first sub-menu is
then displayed. See tables below for listing of air conditioner
submenus.
Set Time
R un
Set
Sch ed u le
Schedule
Call for Service
Advanced
Menu
Run
Schedule
Touch the
or
to step through the list of submenus and
view settings. If a setting can be adjusted,
_
appear. Use the
or
desired value. Touch the
"WORKING" will appear as the settings are being updated.
"DONE" will appear to indicate the change was accepted. If
the change is not accepted, the display will show "FAIL" then
revert to the Fault Screen.
Some parameters being displayed switch between the item
name and the item value. Touch the Hold key to momentarily
stop the display from switching.
To exit an equipment submenu and revert back to the equip-
ment menus, touch the Menu key. Touch Menu again to re-
vert back to the Thermostat Options Menu. Touch the Run
Schedule key to step out of all menus and back to the CT
thermostat Home Screen Display.
10
_
and
+
keys to adjust the setting to the
+
or
to step to the next item.
keys will
Advertisement
Table of Contents
