Table of Contents
Advertisement
■ Quick Menu
The Quick menu has frequently used items. This section describes the items and functions
that can be set on the Quick menu.
Press the
button (or the
MENU
Description of Menu Items
◆ When OHP Is Selected
QUICK MENU
Movie mode
Full
/ Window
Scanner lamp
ON
/ OFF
Stored images clear all
◆ When the OHP stored image Is Displayed
QUICK MENU
Display the next stored image
Display the previous stored image
Stored images clear all
◆ When PC Input Is Selected
QUICK MENU
Picture in Picture
ON
/ OFF
◆ When VIDEO Input Is Selected
No quick menu.
MENU
button on the remote controller) to display the quick menu.
Menu Item
Movie mode
Quit
Scanner lamp*
Stored images
clear all
If the ambient temperature is low when the scanner lamp is
*
turned ON, the OHP images will appear a little red.
Menu Item
Display the next
stored image
Display the
previous stored
Quit
image
Stored images
clear all
Menu Item
Picture in Picture*
Quit
Does not display without input from the computer.
*
E-51
Setting Item
Full/Window
When "Full" is selected:
The entire projected image shows
the video image. The document
scanning speed is 1 frame per
second.
When "Window" is selected:
The window on the bottom right side
of the projected image shows the
video image. The document
scanning speed is 20 frames per
second.
Sets whether the OHP scanner
ON/OFF
lamp is on or off.
Deletes the entire OHP stored
–
images from the internal memory.
Setting Item
Description
–
Displays the image following the
currently displayed image from
stored image.
–
Displays the image previous to the
currently displayed image from
stored image.
–
Deletes the entire OHP stored
images from the internal memory.
Setting Item
ON/OFF
Set this item to ON todisplay
images, from the video source that
is connected, in the window on the
lower right side of the projected
image.
Basic Operation
Description
Description
Advertisement
Table of Contents
