NEC DT20 User Manual page 36

Displaying OHP stored image
OHP STORED
Pressing the
IMAGE
OHP STORED
VOLUME
IMAGE
button: Displays the image previous to the stored image that is currently displayed.
VOLUME
OHP STORED
IMAGE
button: Displays the image following the stored image that is currently displayed.
VOLUME
OHP STORED
IMAGE
* Pressing the
VOLUME
refreshed image that was stored to be displayed.
When you press the REFRESH button and the image freezes, a maximum of eight pages of
the OHP images are stored on the internal DT20 memory.
Press the POWER button, then after selecting OHP mode, the image of the first frozen image
is stored to position q in the diagram below. After that, every time you refresh the display the
images are stored in the internal memory. When the stored images exceed the maximum of
eight images the oldest images are overwritten in the order shown in the diagram below
(starting from q).
OHP STORED
IMAGE
VOLUME
q
OHP STORED OHP STORED
IMAGE IMAGE
VOLUME
VOLUME
i
OHP STORED
VOLUME
buttons display and switch the stored images in the internal memory.
button while a stored image is not displayed causes the most recently
VOLUME
w
OHP STORED
IMAGE
VOLUME
OHP STORED
IMAGE
VOLUME
u
OHP STORED
IMAGE
VOLUME
E-36
OHP STORED
IMAGE
e
OHP STORED
IMAGE
VOLUME
OHP STORED
IMAGE
VOLUME
y
IMAGE
OHP STORED
IMAGE
VOLUME
r
OHP STORED
IMAGE
OHP STORED OHP STORED
VOLUME
IMAGE IMAGE
VOLUME
VOLUME
OHP STORED
IMAGE
VOLUME
t
OHP STORED
IMAGE
VOLUME