Basic Connections - NEC DT20 User Manual

●

Basic connections

Fix the connector cable using
the screw-in fasteners.
To speaker
input
terminals
NOTE
• The personal computer has input terminals for both image and sound for "1" and "2". Hook up the sound and
image to the corresponding terminals. If they are not hooked up to the corresponding terminals, the image and
sound will not be output correctly.
• See page E-11 for information about the input and output terminals.
●
Connecting to IBM NOTE and Compatible
NOTE
After you have connected the supplied cable, check the external CRT output/internal LCD output states and set the
mode in the software running on the PC.
The connection with the PC will not be made if you do not set the external CRT output mode.
To RGB output
To analog RGB
connector on PC
connector on monitor
Terminal panel on the back
of the DT20 main unit
Signal cable (supplied)
E-26
The connector cable
model No. differs
according to the type
of PC.
To audio output
terminal on PC
To RGB-IN1
or RGB-IN2
terminal
DT20