Features; Component And Ccessory; Consideration For Network Set-Up - Inter-m Dante DAC-288 Operation Manual

Features

Features
The D C-288 is a digital audio transport system utilizing
D C-288 connects to your network with a single Ethernet cable. It offers eight channels (2 mic/line selectable)
of line-level analogue in and out, using precision 24-bit
performance, and 119dB dynamic range at sample rates up to 192kHz. This product is used as the audio
matrix, each having eight inputs, where you can send uncompressed audio with low latency using standard
TCP/IP Ethernet network. It's remotely controlled via the network and can be placed anywhere in a facility. Data
tunneling offers the transport of 8 contact closures in and 8 contact closures out together with either RS232 or
RS485 serial data.
- 8channel real-time audio signal transmission
8channel audio input (Line/MIC Input 1~2, Line Input 3~8)
8channel audio output (Line output 1~8)
- Data transmission via network
RS-232C Serial Data transmission
Contact(Dry Contact) Data transmission
- S-CONNECT : set up for equipment and system operating monitoring program
- Check out status of suitable equipment through webpage(CGI)
※ Please refer to a special software manual for methods of webpage operation and system operation program
(S-CONNECT)

Component and ccessory

Component and ccessory
1. D C-288 main body x 1
2. C power supply cord x 1
3. 3P terminal block x 16
4. 4P terminal block x 1
5. 16P terminal block x 2

Consideration for network set-up

Consideration for network set-up
- D C-288 support a set-up of fixed IP and current IP.
- It can change the setting connecting the webpage after attaching D C-288 and PC with a line when setting a
fixed IP.
- Recommend to use with organizing private network when using L N.
udinate's Dante
-D and D-
6. RS-232C cable x 1
7. ux cable x 1
8. Lack mounting screw x 4
9. Lan cable x 2
D NTE MPLIFIER CONTROLLER
network audio solution. The
T
conversion for superb audio
D C-288
3